U-Boot can run out of EL3, NS-EL2 and NS-EL1. Currently default
configuration is NS-EL2 with TF-A but when TF-A is not passed and
configured images can still boot just fine. That's why support this
configuration and describe it via binman.
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
arch/arm/dts/zynqmp-binman-som.dts | 5 +++++
arch/arm/dts/zynqmp-binman.dts | 6 ++++++
2 files changed, 11 insertions(+)
diff --git a/arch/arm/dts/zynqmp-binman-som.dts
b/arch/arm/dts/zynqmp-binman-som.dts
index b0100b23f7f5..634118d170e0 100644
--- a/arch/arm/dts/zynqmp-binman-som.dts
+++ b/arch/arm/dts/zynqmp-binman-som.dts
@@ -174,8 +174,13 @@
default = "conf-1";
conf-1 {
description = "Multi DTB with
TF-A/TEE";
+#if CONFIG_BL31_LOAD_ADDR
firmware = "atf";
loadables = "tee", "uboot",
"fdt";
+#else
+ firmware = "uboot";
+ loadables = "fdt";
+#endif
};
};
};
diff --git a/arch/arm/dts/zynqmp-binman.dts b/arch/arm/dts/zynqmp-binman.dts
index b3cda8b59eec..3348ad63ed63 100644
--- a/arch/arm/dts/zynqmp-binman.dts
+++ b/arch/arm/dts/zynqmp-binman.dts
@@ -84,9 +84,15 @@
default = "@conf-DEFAULT-SEQ";
@conf-SEQ {
description = "NAME";
+#if CONFIG_BL31_LOAD_ADDR
firmware = "atf";
loadables = "tee", "uboot";
fdt = "fdt-SEQ";
+#else
+ firmware = "uboot";
+ loadables = "fdt";
+#endif
+
};
};
};
--
2.43.0
