CONFIG_XILINX_OF_BOARD_DTB_ADDR holds DTB address which U-Boot is checking. Currently address in binman match default value but macro can be used directly. Also sync node name (s/hash-1/hash/) and sync location to have the same order load/hash/image.
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
arch/arm/dts/zynqmp-binman-som.dts | 2 +-
arch/arm/dts/zynqmp-binman.dts | 13 ++++++-------
2 files changed, 7 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/zynqmp-binman-som.dts
b/arch/arm/dts/zynqmp-binman-som.dts
index e8b7084521c5..b0100b23f7f5 100644
--- a/arch/arm/dts/zynqmp-binman-som.dts
+++ b/arch/arm/dts/zynqmp-binman-som.dts
@@ -160,7 +160,7 @@
type = "flat_dt";
arch = "arm64";
compression = "none";
- load = <0x0 0x100000>;
+ load = /bits/ 64
<CONFIG_XILINX_OF_BOARD_DTB_ADDR>;
hash {
algo = "md5";
};
diff --git a/arch/arm/dts/zynqmp-binman.dts b/arch/arm/dts/zynqmp-binman.dts
index 6d28a5bdae25..b3cda8b59eec 100644
--- a/arch/arm/dts/zynqmp-binman.dts
+++ b/arch/arm/dts/zynqmp-binman.dts
@@ -74,8 +74,8 @@
type = "flat_dt";
arch = "arm64";
compression = "none";
- load = <0x0 0x100000>;
- hash-1 {
+ load = /bits/ 64
<CONFIG_XILINX_OF_BOARD_DTB_ADDR>;
+ hash {
algo = "md5";
};
};
@@ -151,15 +151,14 @@
type = "flat_dt";
arch = "arm64";
compression = "none";
- load = <0x0 0x100000>;
+ load = /bits/ 64
<CONFIG_XILINX_OF_BOARD_DTB_ADDR>;
+ hash {
+ algo = "md5";
+ };
uboot-fdt-blob {
filename = "u-boot.dtb";
type = "blob-ext";
};
- hash-1 {
- algo = "md5";
- };
-
};
};
configurations {
--
2.43.0
