This series implements a new bootmeth for RAUC A/B systems. RAUC (Robust Auto Update Controller) is a lightweight update client, providing "Safe and Secure OTA Updates for Embedded Linux". See the following links for more information about RAUC:
https://rauc.io/ https://rauc.readthedocs.io/en/latest/ PHYTEC uses RAUC in its Yocto based distribution "Ampliphy" as the default way of updating embedded devices based on PHYTEC hardware. So far, the logic selecting the correct partitions and files to boot was being implemented in the U-Boot environment. While this is a straightforward way to do it, adding and supporting new platforms became somewhat tedious and is platform-specific. The introduction of U-Boot's "Standard Boot" provided a convincing alternative, promising a simpler and more portable way of booting, even for RAUC systems. This led me to implement a new bootmeth supporting RAUC A/B systems. Note, that this new bootmeth is not proprietary to PHYTEC products and is designed to work on other hardware with a RAUC A/B system, too. The bootmeth currently only supports symmetric A/B partitioning layouts. E.g. A/rescue is not (yet) supported. The partition indexes and default slot tries can be specified via environment variables, so that these settings can be changed on a running system, in case they may change in the future for that individual target, without needing to update the U-Boot proper. For now, the bootmeth_rauc uses a similar approach for loading the Kernel and device tree as the bootmeth_script, in that it requires a FIT containing a U-Boot script loading the desired distro. It could be possible to support booting without a script and load the Kernel and DT directly with this bootmeth, but I found the script method to be very flexible for now, in letting the distro decide what to load. The bootmeth_rauc was tested on a phyBOARD-Pollux i.MX8M Plus [1] with BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2 [2] and the following changes in the U-Boot environment: BOOT_ORDER=system0 system1 rauc_slots=system0 system1 rauc_partitions=1,5 2,6 rauc_slot_default_tries=3 Supported boot devices are currently only MMC devices, but it should be possible to add SPI flashes in the future. To test this patch stack with PHYTEC's phyBOARD-Pollux i.MX8M Plus board, you need to adjust the boot files to include the boot.scr.uimg containing the distro's boot script and set "optargs" to "${raucargs}" in it. Also disable any legacyboot in the U-Boot environment and simply boot with Standard Boot: bootmeth order rauc bootflow scan -lb Regards, Martin [1]: https://www.phytec.eu/en/produkte/single-board-computer/phyboard-pollux/ [2]: https://download.phytec.de/Software/Linux/BSP-Yocto-i.MX8MP/BSP-Yocto-Ampliphy-i.MX8MP-PD24.1.2/ --- Martin Schwan (2): bootstd: Add implementation for bootmeth rauc doc: Add description for bootmeth rauc boot/Kconfig | 11 ++ boot/Makefile | 1 + boot/bootmeth_rauc.c | 408 +++++++++++++++++++++++++++++++++++++++ doc/develop/bootstd/index.rst | 1 + doc/develop/bootstd/overview.rst | 1 + doc/develop/bootstd/rauc.rst | 55 ++++++ 6 files changed, 477 insertions(+) --- base-commit: a2b489b170f8382f746202c36616eaf2bc38fe86 change-id: 20250129-wip-bootmeth-rauc-03b5e2dd88f4 Best regards, -- Martin Schwan <m.sch...@phytec.de>
