On 24.01.25 16:47, Duje Mihanović wrote:
Hello,
This series adds initial support for Marvell's PXA1908 ARM64 SoC and
Samsung's Galaxy Core Prime VE LTE, a smartphone based on said SoC.
On this board, U-Boot is used as a secondary bootloader to work around
certain quirks of the factory S-Boot.
Signed-off-by: Duje Mihanović <duje.mihano...@skole.hr>
---
Changes in v3:
- Rebase on WIP/24Jan2025 and fix board_fdt_blob_setup() compile error it
introduces
- Link to v2:
https://lore.kernel.org/r/20241231-coreprimevelte-v2-0-6a5445d92...@skole.hr
Changes in v2:
- Drop arm,armv8 compatible from CPU nodes to match upstream
- Add intel,xscale-uart compatible to NS16550 and use it in serial nodes to
match upstream
- Add include guards to include/configs/pxa1908.h
- Disable CONFIG_DISPLAY_CPUINFO and CONFIG_CPU
- Rebase on v2025.01-rc5
- Link to v1:
https://lore.kernel.org/r/20241227-coreprimevelte-v1-0-ac8243eee...@skole.hr
---
Duje Mihanović (3):
serial: ns16550: Add Intel XScale support
arm: mmp: add initial support for PXA1908 SoC
board: samsung: add initial support for coreprimevelte board
MAINTAINERS | 8 ++
arch/arm/Kconfig | 11 +++
arch/arm/Makefile | 1 +
arch/arm/dts/Makefile | 2 +
arch/arm/dts/pxa1908-samsung-coreprimevelte.dts | 74 +++++++++++++++++
arch/arm/dts/pxa1908.dtsi | 106 ++++++++++++++++++++++++
arch/arm/mach-mmp/Kconfig | 12 +++
arch/arm/mach-mmp/Makefile | 1 +
arch/arm/mach-mmp/board.c | 84 +++++++++++++++++++
arch/arm/mach-mmp/mmu.c | 30 +++++++
board/samsung/coreprimevelte/Kconfig | 12 +++
board/samsung/coreprimevelte/MAINTAINERS | 6 ++
configs/coreprimevelte_defconfig | 18 ++++
drivers/serial/ns16550.c | 1 +
include/configs/pxa1908.h | 18 ++++
15 files changed, 384 insertions(+)
Applied to u-boot-marvell/master
Thanks,
Stefan
