Enable configs required for detecting and fixing up for different RAM variants. Also resync after savedefconfig.
Signed-off-by: Wadim Egorov <w.ego...@phytec.de> --- configs/phycore_am64x_r5_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/configs/phycore_am64x_r5_defconfig b/configs/phycore_am64x_r5_defconfig index 2d9ff95d781..a764298b186 100644 --- a/configs/phycore_am64x_r5_defconfig +++ b/configs/phycore_am64x_r5_defconfig @@ -5,9 +5,9 @@ CONFIG_SYS_MALLOC_F_LEN=0x80000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_NR_DRAM_BANKS=2 CONFIG_SOC_K3_AM642=y CONFIG_TARGET_PHYCORE_AM64X_R5=y +CONFIG_PHYTEC_SOM_DETECTION=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x7019b800 CONFIG_SF_DEFAULT_SPEED=25000000 @@ -16,6 +16,7 @@ CONFIG_ENV_SIZE=0x20000 CONFIG_DM_GPIO=y CONFIG_SPL_DM_SPI=y CONFIG_DEFAULT_DEVICE_TREE="k3-am642-r5-phycore-som-2gb" +CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_DM_RESET=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y @@ -34,6 +35,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI=y CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000 +CONFIG_OF_BOARD_SETUP=y # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y CONFIG_SPL_SIZE_LIMIT_SUBTRACT_MALLOC=y -- 2.34.1
