Add bootph-all properties to I2C0 nodes to ensure the bus and EEPROM
are accessible across all stages. This enables reading the SoM
configuration at any point during the boot process.
Signed-off-by: Wadim Egorov <w.ego...@phytec.de>
---
arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
index 8f3c3a185ae..c68a48678a2 100644
--- a/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
+++ b/arch/arm/dts/k3-am642-phyboard-electra-rdk-u-boot.dtsi
@@ -72,6 +72,14 @@
bootph-all;
};
+&main_i2c0 {
+ bootph-all;
+};
+
+&main_i2c0_pins_default {
+ bootph-all;
+};
+
&main_mmc1_pins_default {
bootph-all;
};
--
2.34.1
