[PATCH 2/2] drivers: rtc: max313xx: Ensure correct date is read after setting

[Mark Tomlinson]

When setting the time on the MAX31343, the time is not updated
for one second, and reading the time in this interval will give
the old time. Wait one second after writing so that the date
command will show the correct time when setting the clock.

Signed-off-by: Mark Tomlinson <mark.tomlin...@alliedtelesis.co.nz>
Cc: Chris Packham <judge.pack...@gmail.com>
---
 drivers/rtc/max313xx.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/rtc/max313xx.c b/drivers/rtc/max313xx.c
index ccfd6b6d0e2..2cb3f245041 100644
--- a/drivers/rtc/max313xx.c
+++ b/drivers/rtc/max313xx.c
@@ -307,6 +307,11 @@ static int max313xx_set_time(struct udevice *dev, const 
struct rtc_time *t)
                if (ret)
                        return ret;
 
+               break;
+       case ID_MAX31343:
+               /* Time is not updated for 1 second after writing */
+               /* Sleep here so the date command shows the new time */
+               mdelay(1000);
                break;
        default:
                break;
-- 
2.48.1