Hi, I am trying to port u-boot-2009.11-rc1 on 8308 processor. I get the following prints on the terminal and the processor continuously resets
Prints on the console PrivateBuild:sharath (May 19 2011 - 23:18:20) MPC83XX Reset Status: Check Stop, External/Internal Soft, External/Internal Hard Arbiter Event Status: Event Address: 0x00000001 Event Type: 0x0 = Address Time Out Master ID: 0x00 = e300 Core Data Transaction Transfer Size: 0x9 = 1 bytes Transfer Type: 0x0a = Single-beat or Burst read Mem Clk : 0xfe502a8 CPU: e300c3, MPC8308, Rev: 1.0 at 266.667 MHz, CSB: 133.333 MHz Could anybody help? Thanks Sharath
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot