CONFIG_IS_ENABLED(SYS_I2C_LEGACY) is not set on this board,
remove the code and also remove all unnecessary headers that
are included in this file.
Signed-off-by: Marek Vasut <marek.vasut+rene...@mailbox.org>
---
Cc: Adam Ford <aford...@gmail.com>
Cc: Biju Das <biju.das...@bp.renesas.com>
Cc: Lad Prabhakar <prabhakar.mahadev-lad...@bp.renesas.com>
Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
Cc: Paul Barker <paul.barker...@bp.renesas.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-boot@lists.denx.de
---
board/renesas/salvator-x/salvator-x.c | 38 +++------------------------
1 file changed, 4 insertions(+), 34 deletions(-)
diff --git a/board/renesas/salvator-x/salvator-x.c
b/board/renesas/salvator-x/salvator-x.c
index b6fb106ca5d..abb17c3fdc5 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -9,41 +9,18 @@
#if !IS_ENABLED(CONFIG_XPL_BUILD)
-#include <cpu_func.h>
-#include <image.h>
-#include <init.h>
-#include <malloc.h>
-#include <netdev.h>
-#include <dm.h>
-#include <asm/global_data.h>
-#include <dm/platform_data/serial_sh.h>
-#include <asm/processor.h>
-#include <asm/mach-types.h>
#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/gpio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/renesas.h>
#include <asm/arch/rcar-mstp.h>
-#include <i2c.h>
-#include <mmc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define DVFS_MSTP926 BIT(26)
-#define HSUSB_MSTP704 BIT(4) /* HSUSB */
+#include <asm/arch/renesas.h>
+#include <init.h>
int board_early_init_f(void)
{
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
- /* DVFS for reset */
- mstp_clrbits_le32(SMSTPCR9, SMSTPCR9, DVFS_MSTP926);
-#endif
return 0;
}
+#define HSUSB_MSTP704 BIT(4) /* HSUSB */
+
/* HSUSB block registers */
#define HSUSB_REG_LPSTS 0xE6590102
#define HSUSB_REG_LPSTS_SUSPM_NORMAL BIT(14)
@@ -67,13 +44,6 @@ int board_init(void)
return 0;
}
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) && defined(CONFIG_SYS_I2C_SH)
-void reset_cpu(void)
-{
- i2c_reg_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x20, 0x80);
-}
-#endif
-
#ifdef CONFIG_MULTI_DTB_FIT
int board_fit_config_name_match(const char *name)
{
--
2.45.2
