On Fri, Jan 10, 2025 at 3:43 PM Miquel Raynal <miquel.ray...@bootlin.com> wrote: > > There is now support for the display pipeline using one LCD interface, > the LDB bridge and of course the related media power domain controls. > > This is untested as I do not have the EVK but should be enough to use > the display, using bmp, lcdputs and co. For console-like commands, it
Hmm, this cannot work. The upstream imx8mp-evk.dts does not have the LDB enabled. > might be also needed to enable the VIDEO_CONSOLE explicitly using: > > setenv stdout serial,vidconsole0 > > Signed-off-by: Miquel Raynal <miquel.ray...@bootlin.com> > --- > configs/imx8mp_evk_defconfig | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/configs/imx8mp_evk_defconfig b/configs/imx8mp_evk_defconfig > index > 5369f8b84a4172434dcef142c854d06e3437caf1..a3cdf0f3cb237d7b555a2dca741deee21b771e8c > 100644 > --- a/configs/imx8mp_evk_defconfig > +++ b/configs/imx8mp_evk_defconfig > @@ -31,6 +31,7 @@ CONFIG_OF_SYSTEM_SETUP=y > CONFIG_DEFAULT_FDT_FILE="imx8mp-evk.dtb" > CONFIG_SYS_CBSIZE=2048 > CONFIG_SYS_PBSIZE=2074 > +# CONFIG_CONSOLE_MUX is not set > CONFIG_BOARD_LATE_INIT=y > CONFIG_SPL_MAX_SIZE=0x26000 > CONFIG_SPL_BOARD_INIT=y > @@ -60,6 +61,7 @@ CONFIG_CMD_USB=y > CONFIG_CMD_USB_SDP=y > CONFIG_CMD_USB_MASS_STORAGE=y > CONFIG_CMD_CACHE=y > +# CONFIG_CMD_CLS is not set > CONFIG_CMD_REGULATOR=y > CONFIG_CMD_EXT4_WRITE=y > CONFIG_OF_CONTROL=y > @@ -112,6 +114,7 @@ CONFIG_PINCTRL_IMX8M=y > CONFIG_POWER_DOMAIN=y > CONFIG_IMX8M_POWER_DOMAIN=y > CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y > +CONFIG_IMX8MP_MEDIAMIX_BLKCTRL=y > CONFIG_DM_PMIC=y > CONFIG_DM_PMIC_PCA9450=y > CONFIG_SPL_DM_PMIC_PCA9450=y > @@ -139,4 +142,8 @@ CONFIG_USB_GADGET=y > CONFIG_USB_GADGET_MANUFACTURER="FSL" > CONFIG_USB_GADGET_VENDOR_NUM=0x0525 > CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 > +CONFIG_VIDEO=y > +CONFIG_VIDEO_BRIDGE=y > +CONFIG_IMX_LDB=y > +CONFIG_IMX_LCDIF=y > CONFIG_IMX_WATCHDOG=y > > -- > 2.47.0 >
