Hi Siddharth, Thank you for the patch.
On mer., déc. 18, 2024 at 18:15, Siddharth Vadapalli <s-vadapa...@ti.com> wrote: > The config fragment "am62x_a53_usbdfu.config" which adds USB DFU support > for AM62x SoC is applicable to the AM62Px SoC as well. Hence, include it > in "am62px_evm_a53_defconfig" in order to enable support for USB DFU > flash and boot. Remove those configs from "am62px_evm_a53_defconfig" which > are present in the "am62x_a53_usbdfu.config" config fragment that is being > included. > > Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> > --- > This patch has been newly introduced in this series based on the > discussion at: > https://patchwork.ozlabs.org/project/uboot/patch/20241217131658.2920799-3-s-vadapa...@ti.com/#3432702 > > configs/am62px_evm_a53_defconfig | 24 +----------------------- > 1 file changed, 1 insertion(+), 23 deletions(-) > > diff --git a/configs/am62px_evm_a53_defconfig > b/configs/am62px_evm_a53_defconfig > index 9635beb1b27..9862b1f9a16 100644 > --- a/configs/am62px_evm_a53_defconfig > +++ b/configs/am62px_evm_a53_defconfig > @@ -41,14 +41,11 @@ CONFIG_SPL_SYS_MMCSD_RAW_MODE=y > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400 > CONFIG_SPL_DMA=y > -CONFIG_SPL_ENV_SUPPORT=y > CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img" > CONFIG_SPL_I2C=y > CONFIG_SPL_DM_MAILBOX=y > CONFIG_SPL_DM_SPI_FLASH=y > CONFIG_SPL_POWER_DOMAIN=y > -CONFIG_SPL_RAM_SUPPORT=y > -CONFIG_SPL_RAM_DEVICE=y > # CONFIG_SPL_SPI_FLASH_TINY is not set > CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y > CONFIG_SPL_SPI_LOAD=y > @@ -58,14 +55,12 @@ CONFIG_SPL_YMODEM_SUPPORT=y > CONFIG_CMD_BOOTEFI_SELFTEST=y > CONFIG_CMD_NVEDIT_EFI=y > CONFIG_CMD_CLK=y > -CONFIG_CMD_DFU=y > CONFIG_CMD_GPIO=y > CONFIG_CMD_GPT=y > CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > CONFIG_CMD_MTD=y > CONFIG_CMD_REMOTEPROC=y > -CONFIG_CMD_USB=y > CONFIG_CMD_USB_MASS_STORAGE=y > CONFIG_CMD_EFIDEBUG=y > CONFIG_CMD_TIME=y > @@ -85,17 +80,12 @@ CONFIG_SPL_DM_DEVICE_REMOVE=y > CONFIG_SPL_DM_SEQ_ALIAS=y > CONFIG_REGMAP=y > CONFIG_SPL_REGMAP=y > -CONFIG_SPL_SYSCON=y > CONFIG_SPL_OF_TRANSLATE=y > CONFIG_CLK=y > CONFIG_SPL_CLK=y > CONFIG_CLK_TI_SCI=y > -CONFIG_DFU_MMC=y > CONFIG_DFU_MTD=y > -CONFIG_DFU_RAM=y > CONFIG_DFU_SF=y > -CONFIG_SYS_DFU_DATA_BUF_SIZE=0x40000 > -CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000 > CONFIG_DMA_CHANNELS=y > CONFIG_TI_K3_NAVSS_UDMA=y > CONFIG_USB_FUNCTION_FASTBOOT=y > @@ -164,22 +154,10 @@ CONFIG_SYSRESET=y > CONFIG_SPL_SYSRESET=y > CONFIG_SYSRESET_TI_SCI=y > CONFIG_DM_THERMAL=y > -CONFIG_USB=y > -CONFIG_DM_USB_GADGET=y > -CONFIG_SPL_DM_USB_GADGET=y > CONFIG_SPL_USB_HOST=y > -CONFIG_USB_XHCI_HCD=y > -CONFIG_USB_DWC3=y > -CONFIG_USB_DWC3_GENERIC=y > -CONFIG_SPL_USB_DWC3_GENERIC=y > CONFIG_SPL_USB_STORAGE=y > -CONFIG_USB_GADGET=y > -CONFIG_SPL_USB_GADGET=y > -CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments" > -CONFIG_USB_GADGET_VENDOR_NUM=0x0451 > -CONFIG_USB_GADGET_PRODUCT_NUM=0x6165 > -CONFIG_SPL_DFU=y > CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 > CONFIG_EFI_SET_TIME=y > > #include <configs/k3_efi_capsule.config> > +#include <configs/am62x_a53_usbdfu.config> > -- > 2.43.0
