Hi Siddharth, Thank you for the patch.
On mer., déc. 18, 2024 at 18:15, Siddharth Vadapalli <s-vadapa...@ti.com> wrote: > Include the TI K3 DFU environment to support DFU Boot and DFU Flash. > Also add "usb" to the list of "boot_targets". While at it, add a newline > at the end of the file. > > Signed-off-by: Siddharth Vadapalli <s-vadapa...@ti.com> Reviewed-by: Mattijs Korpershoek <mkorpersh...@baylibre.com> > --- > v1: > https://patchwork.ozlabs.org/project/uboot/patch/20241217131658.2920799-3-s-vadapa...@ti.com/ > Changes since v1: > - Updated commit message indicating that a newline is also being added > at the end of this file based on feedback from Mattijs Korpershoek on > the v1 patch. > > board/ti/am62px/am62px.env | 5 +++-- > 1 file changed, 3 insertions(+), 2 deletions(-) > > diff --git a/board/ti/am62px/am62px.env b/board/ti/am62px/am62px.env > index 7ef54079aa8..e0838196e3a 100644 > --- a/board/ti/am62px/am62px.env > +++ b/board/ti/am62px/am62px.env > @@ -1,5 +1,6 @@ > #include <env/ti/ti_common.env> > #include <env/ti/mmc.env> > +#include <env/ti/k3_dfu.env> > > name_kern=Image > console=ttyS2,115200n8 > @@ -7,7 +8,7 @@ args_all=setenv optargs ${optargs} > earlycon=ns16550a,mmio32,0x02800000 > ${mtdparts} > run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} > > -boot_targets=mmc1 mmc0 pxe dhcp > +boot_targets=mmc1 mmc0 usb pxe dhcp > boot=mmc > mmcdev=1 > bootpart=1:2 > @@ -17,4 +18,4 @@ rd_spec=- > #if CONFIG_BOOTMETH_ANDROID > #include <env/ti/android.env> > adtb_idx=3 > -#endif > \ No newline at end of file > +#endif > -- > 2.43.0
