Hi Stefan! On Sat, 2024-12-14 at 14:36 +0100, Stefan Roese wrote: > > > If the RTI watchdog has been enabled in SPL, enabling it in U-Boot proper > > > fails because it can only be enabled once in HW and never stopped. This > > > however leads to a situation that wdt_cyclic() watchdog trigger is not > > > being started any longer and the WDT fires at some point. > > > > > > Allow for WDT re-start by not bailing out if the [previously] configured > > > period matches the one to be configured. > > > > > > Enabling in [A53] SPL has been tested on AM62x-based HW (where [A53] SPL > > > is > > > responsible for loading R5 DM firmware and not this driver). > > > > > > Signed-off-by: Alexander Sverdlin <alexander.sverd...@siemens.com> > > > > I saw that this patch has been set to "Superseded" in the patchwork [1], > > but I'm not sure by which patch. Could it be that it happened by mistake? > > Might be. I need to take a look... > > > My other patch for the rti watchdog [2] is addressing some unrelated > > issue... > > > > 1. > > https://patchwork.ozlabs.org/project/uboot/patch/20241108211506.1348528-1-alexander.sverd...@siemens.com/ > > > > 2. > > https://patchwork.ozlabs.org/project/uboot/patch/20241120222412.1873381-1-alexander.sverd...@siemens.com/ > > https://patchwork.ozlabs.org/project/uboot/patch/20241121080326.1913067-1-alexander.sverd...@siemens.com/ > > Sorry, I missed handling the watchdog patches in this release cycle. > And now we are pretty late in the release cycle and I would prefer > to defer pulling these patches after the upcoming release beginning > of January. Please excuse the inconvenience.
Thanks for the quick reply! No problem, thank you for your efforts! -- Alexander Sverdlin Siemens AG www.siemens.com