The root oscillators reference used to be in rcc node since
3d15245502c4 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock
driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it locally.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
NOTE: For 2025.01
---
Cc: Igor Opaniuk <igor.opan...@gmail.com>
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-b...@dh-electronics.com
Cc: u-boot@lists.denx.de
Cc: uboot-st...@st-md-mailman.stormreply.com
---
arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
index 08439342cb2..ab162f39473 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-u-boot.dtsi
@@ -112,6 +112,10 @@
};
&rcc {
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+ <&clk_lse>, <&clk_lsi>;
+
st,clksrc = <
CLK_MPU_PLL1P
CLK_AXI_PLL2P
--
2.45.2
