The root oscillators reference used to be in rcc node since
3d15245502c4 ("ARM: dts: stm32mp1: explicit clock reference needed by RCC clock
driver")
however this is not part of upstream stm32mp151.dtsi . The
RCC driver does need this reference, reinstate it globally.
Signed-off-by: Marek Vasut <ma...@denx.de>
---
NOTE: Would be good for 2025.01, but needs to be tested on other systems
---
Cc: Igor Opaniuk <igor.opan...@gmail.com>
Cc: Patrice Chotard <patrice.chot...@foss.st.com>
Cc: Patrick Delaunay <patrick.delau...@foss.st.com>
Cc: Simon Glass <s...@chromium.org>
Cc: Tom Rini <tr...@konsulko.com>
Cc: u-b...@dh-electronics.com
Cc: u-boot@lists.denx.de
Cc: uboot-st...@st-md-mailman.stormreply.com
---
arch/arm/dts/stm32mp15-u-boot.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/dts/stm32mp15-u-boot.dtsi
b/arch/arm/dts/stm32mp15-u-boot.dtsi
index 66d4c40c6a8..3f57bd5fe0f 100644
--- a/arch/arm/dts/stm32mp15-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15-u-boot.dtsi
@@ -186,6 +186,9 @@
bootph-all;
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "hse", "hsi", "csi", "lse", "lsi";
+ clocks = <&clk_hse>, <&clk_hsi>, <&clk_csi>,
+ <&clk_lse>, <&clk_lsi>;
};
&usart1 {
--
2.45.2
