Dear Aneesh V, In message <1305472900-4004-16-git-send-email-ane...@ti.com> you wrote: > Add support for the SDRAM controller (EMIF). > > Signed-off-by: Aneesh V <ane...@ti.com> > V2: > * Changes for makefile changes > * Minor corrections in do_lpddr2_init() > * Minor corrections to read_idle interval calculation > * Sanity test of memory after doing the initialization > * Fixed warnings reported with with latest GCC compilers > --- > arch/arm/cpu/armv7/omap4/Makefile | 3 + > arch/arm/cpu/armv7/omap4/board.c | 2 +- > arch/arm/cpu/armv7/omap4/emif.c | 298 +++++++++++ > arch/arm/cpu/armv7/omap4/sdram_elpida.c | 118 +++++ > arch/arm/include/asm/arch-omap4/emif.h | 719 > +++++++++++++++++++++++++++ > arch/arm/include/asm/arch-omap4/omap4.h | 11 + > arch/arm/include/asm/arch-omap4/sys_proto.h | 1 + > include/configs/omap4_sdp4430.h | 5 - > spl/board/ti/omap4.mk | 9 +- > 9 files changed, 1159 insertions(+), 7 deletions(-) > create mode 100644 arch/arm/cpu/armv7/omap4/emif.c > create mode 100644 arch/arm/cpu/armv7/omap4/sdram_elpida.c > create mode 100644 arch/arm/include/asm/arch-omap4/emif.h
Note that this needs to be fixed anyway to use standard macros (get rid of modify_reg_32() etc.) Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Do you suppose the reason the ends of the `Intel Inside' logo don't match up is that it was drawn on a Pentium? _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
