Hi
Il gio 5 dic 2024, 10:36 Maniyam, Dinesh <dinesh.mani...@intel.com> ha
scritto:
>
>
> > -----Original Message-----
> > From: Maniyam, Dinesh <dinesh.mani...@intel.com>
> > Sent: Thursday, 5 December 2024 5:23 pm
> > To: u-boot@lists.denx.de
> > Cc: Marek <ma...@denx.de>; Simon <simon.k.r.goldschm...@gmail.com>; Tom
> > Rini <tr...@konsulko.com>; Dario Binacchi
> > <dario.binac...@amarulasolutions.com>; Michael Trimarchi
> > <mich...@amarulasolutions.com>; Johan Jonker <jbx6...@gmail.com>; Michal
> > Simek <michal.si...@amd.com>; Arseniy Krasnov
> > <avkras...@salutedevices.com>; Alexander Dahl <a...@thorsis.com>; William
> > Zhang <william.zh...@broadcom.com>; Igor Prusov
> > <ivpru...@salutedevices.com>; Meng, Tingting <tingting.m...@intel.com>;
> > Chee, Tien Fong <tien.fong.c...@intel.com>; Hea, Kok Kiang
> > <kok.kiang....@intel.com>; Maniyam, Dinesh <dinesh.mani...@intel.com>;
> > Ng, Boon Khai <boon.khai...@intel.com>; Yuslaimi, Alif Zakuan
> > <alif.zakuan.yusla...@intel.com>; Zamri, Muhammad Hazim Izzat
> > <muhammad.hazim.izzat.za...@intel.com>; Lim, Jit Loon
> > <jit.loon....@intel.com>; Tang, Sieu Mun <sieu.mun.t...@intel.com>
> > Subject: [resend v2 14/19] configs: nand2_defconfig: Enable configs for
> nand boot
> >
> > From: Dinesh Maniyam <dinesh.mani...@intel.com>
> >
> > Enable configs for nand boot.
> >
> > Signed-off-by: Dinesh Maniyam <dinesh.mani...@intel.com>
> >
> > ---
> > v2:
> > - remove the "this patch is to" commit phrases
> > - using #include mechanism to keep track of the variant
> > - add maintainer
> > ---
> > ---
> > board/intel/agilex5-socdk/MAINTAINERS | 2 ++
> > configs/socfpga_agilex5_nand2_defconfig | 33 +++++++++++++++++++++++++
> > 2 files changed, 35 insertions(+)
> > create mode 100644 configs/socfpga_agilex5_nand2_defconfig
> >
> > diff --git a/board/intel/agilex5-socdk/MAINTAINERS b/board/intel/agilex5-
> > socdk/MAINTAINERS
> > index b696f788c8..30d8815d20 100644
> > --- a/board/intel/agilex5-socdk/MAINTAINERS
> > +++ b/board/intel/agilex5-socdk/MAINTAINERS
> > @@ -2,7 +2,9 @@ SOCFPGA BOARD
> > M: Tien Fong Chee <tien.fong.c...@intel.com>
> > M: Teik Heng Chong <teik.heng.ch...@intel.com>
> > M: Jit Loon Lim <jit.loon....@intel.com>
> > +M: Dinesh Maniyam <dinesh.mani...@intel.com>
> > S: Maintained
> > F: board/intel/agilex5-socdk/
> > F: include/configs/socfpga_agilex5_socdk.h
> > F: configs/socfpga_agilex5_defconfig
> > +F: configs/socfpga_agilex5_nand2_defconfig
> > diff --git a/configs/socfpga_agilex5_nand2_defconfig
> > b/configs/socfpga_agilex5_nand2_defconfig
> > new file mode 100644
> > index 0000000000..3bfe6270fd
> > --- /dev/null
> > +++ b/configs/socfpga_agilex5_nand2_defconfig
> > @@ -0,0 +1,33 @@
> > +#include <configs/socfpga_agilex5_defconfig>
> > +
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_SOCFPGA=y
> > +CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex5_socdk"
> > +CONFIG_OF_UPSTREAM=y
> > +CONFIG_BOOTARGS="earlycon panic=-1 root=${nandroot} rw rootwait
> > rootfstype=ubifs ubi.mtd=1"
> > +CONFIG_TARGET_SOCFPGA_AGILEX5_NAND2=y
> > +CONFIG_PHY_CADENCE_COMBOPHY=n
> > +CONFIG_SPL_PHY_CADENCE_COMBOPHY=n
> > +# CONFIG_MMC_DW is not set
> > +CONFIG_SPL_MTD=y
> > +CONFIG_CMD_NAND_TRIMFFS=y
> > +CONFIG_CMD_NAND_LOCK_UNLOCK=y
> > +CONFIG_SPL_MTD_SUPPORT=y
> > +CONFIG_MTDIDS_DEFAULT="nand0=10b80000.nand.0"
> > +CONFIG_MTDPARTS_DEFAULT="mtdparts=10b80000.nand.0:2m(u-boot),-
> > (root)"
> > +CONFIG_CMD_UBIFS=y
> > +CONFIG_MTD_UBI=y
> > +CONFIG_MTD_UBI_WL_THRESHOLD=4096
> > +CONFIG_MTD_UBI_BEB_LIMIT=20
> > +CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
> > +CONFIG_SYS_NAND_U_BOOT_OFFS=0x0
> > +CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x100000
> > +CONFIG_UBI_SILENCE_MSG=y
> > +CONFIG_MTD_RAW_NAND=y
> > +CONFIG_NAND_CADENCE=y
> > +CONFIG_SPL_NAND_SUPPORT=y
> > +CONFIG_SPL_NAND_FRAMEWORK=y
> > +CONFIG_SPL_NAND_CADENCE=y
> > +CONFIG_SYS_NAND_ONFI_DETECTION=y
> > +CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
> > +CONFIG_SYS_NAND_PAGE_SIZE=0x800
> > --
> > 2.19.0
>
> Hi Michael,
>
> Please guide me through the process to run the CI in github.
>
I will do it for you and send some instructions today.
Sorry for delay. I was busy ;)
Michael
>
> Thanks.
>
