On Thu, May 12, 2011 at 12:43 PM, Remy Bohmer <li...@bohmer.net> wrote:
> Hi, > > 2011/5/5 Simon Glass <s...@chromium.org>: > > This adds basic USB support for port 0. The other port is not supported > by this CL. > > > > Signed-off-by: Simon Glass <s...@chromium.org> > > --- > > arch/arm/include/asm/arch-tegra2/tegra2.h | 2 + > > arch/arm/include/asm/arch-tegra2/usb.h | 217 ++++++++++++++++++++ > > board/nvidia/common/Makefile | 53 +++++ > > board/nvidia/common/board.c | 5 + > > board/nvidia/common/usb.c | 313 > +++++++++++++++++++++++++++++ > > drivers/usb/host/Makefile | 1 + > > drivers/usb/host/ehci-hcd.c | 39 ++++ > > drivers/usb/host/ehci-tegra.c | 73 +++++++ > > drivers/usb/host/ehci.h | 6 +- > > include/configs/harmony.h | 7 + > > include/configs/seaboard.h | 10 + > > include/configs/tegra2-common.h | 30 +++ > > This patch touches a lot of files in different subsystems. > Please split it up. For example start with a patch series modifying > the generic USB code in drivers/usb, followed by a series that > modifies board files. > Hi Remy, Thanks for the response. The series has 7 patches in all. Do you mean that I should split this patch (number 6) in to several patches so that there are, say, 10 in all? I can see how to do that easily enough. When you say 'series' I wonder if you mean that you want this series split into several series... which I am less sure about. Regards, Simon > > Kind regards, > > Remy >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
