Provide a page describing the usage of U-Boot on the LicheeRV Nano and a description of the board.
Signed-off-by: Thomas Bonnefille <thomas.bonnefi...@bootlin.com> --- doc/board/sophgo/licheerv_nano.rst | 72 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) diff --git a/doc/board/sophgo/licheerv_nano.rst b/doc/board/sophgo/licheerv_nano.rst new file mode 100644 index 0000000000000000000000000000000000000000..70401e295c4a56845353c3a92ab4ec98678a1180 --- /dev/null +++ b/doc/board/sophgo/licheerv_nano.rst @@ -0,0 +1,72 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +LicheeRV Nano +========== + +SG2002 RISC-V SoC +------------------ +The SG2002 is a high-performance, low-power 64-bit RISC-V/ARM SoC from Sophgo. + +Mainline support +---------------- +The support for following drivers are already enabled: +1. ns16550 UART Driver. +2. Synopsys Designware MSHC Driver + +Building +~~~~~~~~ +1. Add the RISC-V toolchain to your PATH. +2. Setup ARCH & cross compilation environment variable: + +.. code-block:: console + + export CROSS_COMPILE=<riscv64 toolchain prefix> + cd <U-Boot-dir> + make licheerv_nano_defconfig + make + +This will generate u-boot.bin + +Booting +~~~~~~~ +Currently, we rely on vendor FSBL (First Stage Boot Loader) to initialize the +clock and load the u-boot image, then bootup from it. + +To run u-boot.bin on top of FSBL, follow these steps: + +1. Use mainline OpenSBI with a newer version than 1.5 to generate fw_dynamic. + +2. Generate a compatible u-boot.bin using U-Boot with the LicheeRV Nano default + configuration. + +3. Use the vendor-provided tool [1] to create a unified fip.bin file containing + FSBL, OpenSBI, and U-Boot. + Note that you will have to use the file cv181x.bin as the FSBL. + +2. Place the generated fip.bin file into the FAT partition of the SD card. + +3. Insert the SD card into the board and power it on. + +The board will automatically execute the FSBL from the fip.bin file. +Subsequently, it will transition to OpenSBI, and finally, OpenSBI will invoke +U-Boot. + +[1]: https://github.com/sophgo/fiptool + + +Sample boot log from LicheeRV Nano board +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +.. code-block:: none + + U-Boot 2024.10 (Oct 24 2024 - 15:00:20 +0200)licheerv_nano + + DRAM: 256 MiB + Core: 19 devices, 11 uclasses, devicetree: separate + MMC: mmc@4310000: 0 + Loading Environment from nowhere... OK + In: serial@4140000 + Out: serial@4140000 + Err: serial@4140000 + Net: No ethernet found. + Hit any key to stop autoboot: 0 + licheerv_nano# -- 2.47.0
