On 2024/11/6 00:00, Jonas Karlman wrote:
After the migration to use standard boot, storage media should automatically be initialized in the order listed in boot_targets env. Drop USE_PREBOOT to speed up boot with ~12 seconds when booting from e.g. SD-card or eMMC. Before: 3,048,599 2,056 main_loop 3,050,717 2,118 usb_start 15,070,499 12,019,782 cli_loop After: 3,058,244 2,054 main_loop 3,063,260 5,016 cli_loop Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com> Thanks, - Kever
--- configs/tinker-rk3288_defconfig | 1 - configs/tinker-s-rk3288_defconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig index fb42b8bcb00d..1007d9ca9e15 100644 --- a/configs/tinker-rk3288_defconfig +++ b/configs/tinker-rk3288_defconfig @@ -17,7 +17,6 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set -CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb" CONFIG_MISC_INIT_R=y CONFIG_SPL_PAD_TO=0x7f8000 diff --git a/configs/tinker-s-rk3288_defconfig b/configs/tinker-s-rk3288_defconfig index f3a392688f02..47d089ff4780 100644 --- a/configs/tinker-s-rk3288_defconfig +++ b/configs/tinker-s-rk3288_defconfig @@ -17,7 +17,6 @@ CONFIG_DEBUG_UART_BASE=0xff690000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y # CONFIG_ANDROID_BOOT_IMAGE is not set -CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb" CONFIG_MISC_INIT_R=y CONFIG_SPL_PAD_TO=0x7f8000
