On 2024/11/6 00:00, Jonas Karlman wrote:
Drop the unneeded bootph-all prop from dmc node, it is already defined
in soc u-boot.dtsi.
Remove booth-all prop from gpio7 node, this node is not needed in TPL.
Adjust bootph props to include pinctrl related nodes for UART2.
Remove the explicit bootph-all prop from the pinctrl node, any bootph-
prop will automatically be propagated to the pinctrl node.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
Reviewed-by: Kever Yang <kever.y...@rock-chips.com>
Thanks,
- Kever
---
arch/arm/dts/rk3288-tinker-u-boot.dtsi | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
index 032dac221c24..1665e4f5d10f 100644
--- a/arch/arm/dts/rk3288-tinker-u-boot.dtsi
+++ b/arch/arm/dts/rk3288-tinker-u-boot.dtsi
@@ -6,7 +6,6 @@
#include "rk3288-u-boot.dtsi"
&dmc {
- bootph-all;
rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
@@ -18,6 +17,7 @@
};
&gpio7 {
+ /delete-property/ bootph-all;
bootph-pre-ram;
};
@@ -29,7 +29,7 @@
};
&pcfg_pull_none {
- bootph-pre-ram;
+ bootph-all;
};
&pcfg_pull_none_drv_8ma {
@@ -37,17 +37,13 @@
};
&pcfg_pull_up {
- bootph-pre-ram;
+ bootph-all;
};
&pcfg_pull_up_drv_8ma {
bootph-pre-ram;
};
-&pinctrl {
- bootph-all;
-};
-
&sdmmc {
bootph-pre-ram;
};
@@ -77,7 +73,8 @@
};
&uart2_xfer {
- bootph-all;
+ bootph-pre-sram;
+ bootph-pre-ram;
};
&vcc_sd {
