Platform has been switched to binman that's why there is no need for this
script and also Kconfig symbols.
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
Changes in v2:
- new patch
arch/arm/mach-zynqmp/mkimage_fit_atf.sh | 240 ------------------------
boot/Kconfig | 1 -
2 files changed, 241 deletions(-)
delete mode 100755 arch/arm/mach-zynqmp/mkimage_fit_atf.sh
diff --git a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
b/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
deleted file mode 100755
index cdecb1c1d351..000000000000
--- a/arch/arm/mach-zynqmp/mkimage_fit_atf.sh
+++ /dev/null
@@ -1,240 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0+
-#
-# script to generate FIT image source for Xilinx ZynqMP boards with
-# ARM Trusted Firmware and multiple device trees (given on the command line)
-#
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
-
-BL33="u-boot-nodtb.bin"
-[ -z "$BL31" ] && BL31="bl31.bin"
-BL31_ELF="${BL31%.*}.elf"
-[ -f ${BL31_ELF} ] && ATF_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL31_ELF}"
| \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$ATF_LOAD_ADDR" ] && ATF_LOAD_ADDR="0xfffea000"
-ATF_LOAD_ADDR_LOW=`printf 0x%x $((ATF_LOAD_ADDR & 0xffffffff))`
-ATF_LOAD_ADDR_HIGH=`printf 0x%x $((ATF_LOAD_ADDR >> 32))`
-
-[ -z "$BL32" ] && BL32="tee.bin"
-BL32_ELF="${BL32%.*}.elf"
-[ -f ${BL32_ELF} ] && TEE_LOAD_ADDR=`${CROSS_COMPILE}readelf -l "${BL32_ELF}"
| \
-awk '/Entry point/ { print $3 }'`
-
-[ -z "$TEE_LOAD_ADDR" ] && TEE_LOAD_ADDR="0x60000000"
-TEE_LOAD_ADDR_LOW=`printf 0x%x $((TEE_LOAD_ADDR & 0xffffffff))`
-TEE_LOAD_ADDR_HIGH=`printf 0x%x $((TEE_LOAD_ADDR >> 32))`
-
-if [ -z "$BL33_LOAD_ADDR" ];then
- BL33_LOAD_ADDR=`awk '/CONFIG_TEXT_BASE/ { print $3 }'
include/generated/autoconf.h`
-fi
-BL33_LOAD_ADDR_LOW=`printf 0x%x $((BL33_LOAD_ADDR & 0xffffffff))`
-BL33_LOAD_ADDR_HIGH=`printf 0x%x $((BL33_LOAD_ADDR >> 32))`
-
-DTB_LOAD_ADDR=`awk '/CONFIG_XILINX_OF_BOARD_DTB_ADDR/ { print $3 }'
include/generated/autoconf.h`
-if [ ! -z "$DTB_LOAD_ADDR" ]; then
- DTB_LOAD_ADDR_LOW=`printf 0x%x $((DTB_LOAD_ADDR & 0xffffffff))`
- DTB_LOAD_ADDR_HIGH=`printf 0x%x $((DTB_LOAD_ADDR >> 32))`
- DTB_LOAD="load = <$DTB_LOAD_ADDR_HIGH $DTB_LOAD_ADDR_LOW>;"
-else
- DTB_LOAD=""
-fi
-
-if [ -z "$*" ]; then
- DT=arch/arm/dts/${DEVICE_TREE}.dtb
-else
- DT=$*
-fi
-
-if [ ! -f $BL31 ]; then
- echo "WARNING: BL31 file $BL31 NOT found, U-Boot will run in EL3" >&2
- BL31=/dev/null
-fi
-
-cat << __HEADER_EOF
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-/dts-v1/;
-
-/ {
- description = "Configuration for Xilinx ZynqMP SoC";
-
- images {
- uboot {
- description = "U-Boot (64-bit)";
- data = /incbin/("$BL33");
- type = "firmware";
- os = "u-boot";
- arch = "arm64";
- compression = "none";
- load = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
- entry = <$BL33_LOAD_ADDR_HIGH $BL33_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__HEADER_EOF
-
-if [ -f $BL31 ]; then
-cat << __ATF
- atf {
- description = "Trusted Firmware-A";
- data = /incbin/("$BL31");
- type = "firmware";
- os = "arm-trusted-firmware";
- arch = "arm64";
- compression = "none";
- load = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
- entry = <$ATF_LOAD_ADDR_HIGH $ATF_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__ATF
-fi
-
-if [ -f $BL32 ]; then
-cat << __TEE
- tee {
- description = "TEE firmware";
- data = /incbin/("$BL32");
- type = "firmware";
- os = "tee";
- arch = "arm64";
- compression = "none";
- load = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
- entry = <$TEE_LOAD_ADDR_HIGH $TEE_LOAD_ADDR_LOW>;
- hash {
- algo = "md5";
- };
- };
-__TEE
-fi
-
-MULTI_DTB=`awk '/CONFIG_MULTI_DTB_FIT / { print $3 }'
include/generated/autoconf.h`
-
-if [ 1"$MULTI_DTB" -eq 11 ]; then
- cat << __FDT_IMAGE_EOF
- fdt_1 {
- description = "Multi DTB fit image";
- data = /incbin/("fit-dtb.blob");
- type = "flat_dt";
- arch = "arm64";
- compression = "none";
- $DTB_LOAD
- hash {
- algo = "md5";
- };
- };
- };
- configurations {
- default = "config_1";
-__FDT_IMAGE_EOF
-
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB without TF-A";
- firmware = "uboot";
- loadables = "fdt_1";
- };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB with TF-A and TEE";
- firmware = "atf";
- loadables = "uboot", "tee", "fdt_1";
- };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
- config_1 {
- description = "Multi DTB with TF-A";
- firmware = "atf";
- loadables = "uboot", "fdt_1";
- };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cat << __ITS_EOF
- };
-};
-__ITS_EOF
-
-else
-
-DEFAULT=1
-cnt=1
-for dtname in $DT
-do
- cat << __FDT_IMAGE_EOF
- fdt_$cnt {
- description = "$(basename $dtname .dtb)";
- data = /incbin/("$dtname");
- type = "flat_dt";
- arch = "arm64";
- compression = "none";
- $DTB_LOAD
- hash {
- algo = "md5";
- };
- };
-__FDT_IMAGE_EOF
-
-[ "x$(basename $dtname .dtb)" = "x${DEVICE_TREE}" ] && DEFAULT=$cnt
-
-cnt=$((cnt+1))
-done
-
-cat << __CONF_HEADER_EOF
- };
- configurations {
- default = "config_$DEFAULT";
-
-__CONF_HEADER_EOF
-
-cnt=1
-for dtname in $DT
-do
-if [ ! -f $BL31 ]; then
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "uboot";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-else
-if [ -f $BL32 ]; then
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "atf";
- loadables = "uboot", "tee";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-else
-cat << __CONF_SECTION1_EOF
- config_$cnt {
- description = "$(basename $dtname .dtb)";
- firmware = "atf";
- loadables = "uboot";
- fdt = "fdt_$cnt";
- };
-__CONF_SECTION1_EOF
-fi
-fi
-
-cnt=$((cnt+1))
-done
-
-cat << __ITS_EOF
- };
-};
-__ITS_EOF
-
-fi
diff --git a/boot/Kconfig b/boot/Kconfig
index 7dd30a030e39..e1a79976da1c 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -291,7 +291,6 @@ config USE_SPL_FIT_GENERATOR
config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on USE_SPL_FIT_GENERATOR
- default "arch/arm/mach-zynqmp/mkimage_fit_atf.sh" if SPL_LOAD_FIT &&
ARCH_ZYNQMP
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
--
2.43.0
