From: Marek Vasut <ma...@denx.de>
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <ma...@denx.de>
Reviewed-by: Peter Robinson <pbrobin...@gmail.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Signed-off-by: Michal Simek <michal.si...@amd.com>
---
Changes in v2:
- Rebase on the top of my series which do conversion to binman
- Taken from git with all tags
Makefile | 18 ------------------
boot/Kconfig | 14 --------------
doc/usage/fit/howto.rst | 4 ----
3 files changed, 36 deletions(-)
diff --git a/Makefile b/Makefile
index 03337450f636..6a86e3df2d53 100644
--- a/Makefile
+++ b/Makefile
@@ -1148,13 +1148,6 @@ ifeq ($(CONFIG_OF_EMBED)$(CONFIG_EFI_APP),y)
@echo >&2 "CONFIG_OF_SEPARATE for boards in mainline."
@echo >&2 "See doc/develop/devicetree/control.rst for more info."
@echo >&2 "===================================================="
-endif
-ifneq ($(CONFIG_SPL_FIT_GENERATOR),)
- @echo >&2 "===================== WARNING ======================"
- @echo >&2 "This board uses CONFIG_SPL_FIT_GENERATOR. Please migrate"
- @echo >&2 "to binman instead, to avoid the proliferation of"
- @echo >&2 "arch-specific scripts with no tests."
- @echo >&2 "===================================================="
endif
$(call deprecated,CONFIG_WDT,DM watchdog,v2019.10,\
$(CONFIG_WATCHDOG)$(CONFIG_HW_WATCHDOG))
@@ -1435,17 +1428,6 @@ OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
$(call if_changed,objcopy)
-# Boards with more complex image requirements can provide an .its source file
-# or a generator script
-# NOTE: Please do not use this. We are migrating away from Makefile rules to
use
-# binman instead.
-ifneq ($(CONFIG_USE_SPL_FIT_GENERATOR),)
-U_BOOT_ITS := u-boot.its
-$(U_BOOT_ITS): $(U_BOOT_ITS_DEPS) FORCE
- $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
- $(patsubst %,$(dt_dir)/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
-endif
-
ifdef CONFIG_SPL_LOAD_FIT
MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
-a $(CONFIG_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
diff --git a/boot/Kconfig b/boot/Kconfig
index e1a79976da1c..af54a0660e3b 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -283,20 +283,6 @@ config SPL_FIT_IMAGE_POST_PROCESS
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
-config USE_SPL_FIT_GENERATOR
- bool "Use a script to generate the .its script"
- depends on SPL_FIT
- default y if SPL_FIT && ARCH_ZYNQMP
-
-config SPL_FIT_GENERATOR
- string ".its file generator script for U-Boot FIT image"
- depends on USE_SPL_FIT_GENERATOR
- help
- Specifies a (platform specific) script file to generate the FIT
- source file used to build the U-Boot FIT image file. This gets
- passed a list of supported device tree file stub names to
- include in the generated image.
-
if VPL
config VPL_FIT
diff --git a/doc/usage/fit/howto.rst b/doc/usage/fit/howto.rst
index 280eff724f6e..675c9aa5bb0f 100644
--- a/doc/usage/fit/howto.rst
+++ b/doc/usage/fit/howto.rst
@@ -57,10 +57,6 @@ own subnode under the /images node, which should then be
referenced from one or
multiple /configurations subnodes. The required images must be enumerated in
the "loadables" property as a list of strings.
-CONFIG_SPL_FIT_GENERATOR can point to a script which generates this image
source
-file during the build process. It gets passed a list of device tree files
(taken
-from the CONFIG_OF_LIST symbol).
-
The SPL also records to a DT all additional images (called loadables) which are
loaded. The information about loadables locations is passed via the DT node
with
fit-images name.
--
2.43.0
