For Ethernet to work on the RZ/G2L board, we need to enable support for the ksz9131 PHY and enable random MAC address generation (as no MAC address is programmed into the board).
We also enable the `dhcp`, `mii` and `ping` commands so that Ethernet functionality can be tested and used to boot Linux. Signed-off-by: Paul Barker <paul.barker...@bp.renesas.com> --- configs/renesas_rzg2l_smarc_defconfig | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/configs/renesas_rzg2l_smarc_defconfig b/configs/renesas_rzg2l_smarc_defconfig index 7a1224b3f07a..991818e797ea 100644 --- a/configs/renesas_rzg2l_smarc_defconfig +++ b/configs/renesas_rzg2l_smarc_defconfig @@ -26,6 +26,9 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_MII=y +CONFIG_CMD_PING=y CONFIG_CMD_PMIC=y CONFIG_CMD_EXT2=y CONFIG_CMD_EXT4=y @@ -40,6 +43,7 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SYS_MMC_ENV_PART=2 CONFIG_VERSION_VARIABLE=y +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_REGMAP=y CONFIG_CLK=y CONFIG_CLK_RENESAS=y @@ -49,6 +53,8 @@ CONFIG_DM_I2C=y CONFIG_MMC_IO_VOLTAGE=y CONFIG_MMC_UHS_SUPPORT=y CONFIG_MMC_HS400_SUPPORT=y +CONFIG_PHY_MICREL=y +CONFIG_PHY_MICREL_KSZ90X1=y CONFIG_DM_PMIC=y CONFIG_PMIC_RAA215300=y CONFIG_DM_REGULATOR=y -- 2.43.0