Currently, enabling WDT_GPIO on a board which uses SPL, but does not have SPL_WDT, SPL_DM_GPIO or SPL_OF_CONTROL enabled, breaks the build.
Make it possible to use the WDT_GPIO driver on such boards by introducing a separate symbol controlling whether the driver is built for SPL. Make it default to WDT_GPIO such that boards that already have it enabled and all the SPL prerequisites satisfied will continue to have it in SPL. Signed-off-by: Rasmus Villemoes <r...@prevas.dk> --- drivers/watchdog/Kconfig | 9 +++++++++ drivers/watchdog/Makefile | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 0c3e9913318..18028269b9e 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -178,6 +178,15 @@ config WDT_GPIO doc/device-tree-bindings/watchdog/gpio-wdt.txt for information on how to describe the watchdog in device tree. +config SPL_WDT_GPIO + bool "External gpio watchdog support in SPL" + depends on SPL_WDT + depends on SPL_DM_GPIO + depends on SPL_OF_REAL + default WDT_GPIO + help + Support for external watchdog fed by toggling a gpio in SPL. + config WDT_MAX6370 bool "MAX6370 watchdog timer support" depends on WDT diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7b39adcf0ff..a450c33b3ad 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -30,7 +30,7 @@ obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o obj-$(CONFIG_WDT_ORION) += orion_wdt.o obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o obj-$(CONFIG_WDT_FTWDT010) += ftwdt010_wdt.o -obj-$(CONFIG_WDT_GPIO) += gpio_wdt.o +obj-$(CONFIG_$(SPL_TPL_)WDT_GPIO) += gpio_wdt.o obj-$(CONFIG_WDT_MAX6370) += max6370_wdt.o obj-$(CONFIG_WDT_MCF) += mcf_wdt.o obj-$(CONFIG_WDT_MESON_GXBB) += meson_gxbb_wdt.o -- 2.46.2