Hi, On Mon, 30 Sept 2024 at 03:03, Peter Robinson <pbrobin...@gmail.com> wrote: > > On Thu, 26 Sept 2024 at 19:32, Paul Kocialkowski <pa...@sys-base.io> wrote: > > > > From: Paul Kocialkowski <cont...@paulk.fr> > > > > The boot timing and reporting (bootstage) infrastructure is useful for > > performance analysis and debug but adds overhead and console noise when > > using the device normally. Remove it from the device config. > > > > Signed-off-by: Paul Kocialkowski <cont...@paulk.fr> > Reviewed-by: Peter Robinson <pbrobin...@gmail.com> > > This makes sense, for those that want this information will know how > to build it for testing.
Can you just disable the report? There should be no need to disable bootstage itself. Regards, Simon > > --- > > configs/rockpro64-rk3399_defconfig | 3 --- > > 1 file changed, 3 deletions(-) > > > > diff --git a/configs/rockpro64-rk3399_defconfig > > b/configs/rockpro64-rk3399_defconfig > > index fc0804a0b80d..095d27ffaa04 100644 > > --- a/configs/rockpro64-rk3399_defconfig > > +++ b/configs/rockpro64-rk3399_defconfig > > @@ -19,8 +19,6 @@ CONFIG_SPL_SPI=y > > CONFIG_SYS_LOAD_ADDR=0x800800 > > CONFIG_PCI=y > > CONFIG_DEBUG_UART=y > > -CONFIG_BOOTSTAGE=y > > -CONFIG_BOOTSTAGE_REPORT=y > > CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" > > CONFIG_DISPLAY_BOARDINFO_LATE=y > > CONFIG_SPL_MAX_SIZE=0x40000 > > @@ -38,7 +36,6 @@ CONFIG_CMD_POWEROFF=y > > CONFIG_CMD_USB=y > > # CONFIG_CMD_SETEXPR is not set > > CONFIG_CMD_TIME=y > > -CONFIG_CMD_BOOTSTAGE=y > > CONFIG_SPL_OF_CONTROL=y > > CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks > > assigned-clock-rates assigned-clock-parents" > > CONFIG_ENV_IS_IN_SPI_FLASH=y > > -- > > 2.46.2 > >