This enables the ESMs and the associated PMIC. Programming these bits is
a requirement to make the watchdog actually reset the board.

Note, this relies on the linked devicetree changes to land in Linux
first and get synced here, otherwise the board will fail to boot!

I've tested this series (with the linked change) on the k3-j784s4-evm,
but not its sibling the k3-am69-sk. I'd appreciate at a minimum someone
to test on that platform to ensure this doesn't break boot.

Link: 
https://lore.kernel.org/all/20240906-j784s4-tps6594-bootph-v1-0-c5b58d43b...@redhat.com/
Signed-off-by: Andrew Halaney <ahala...@redhat.com>
---
Andrew Halaney (1):
      configs: j784s4_evm_r5: Enable ESM related configs

Keerthy (1):
      board: ti: j784s4: Initialize the ESM & PMIC ESM

Neha Malcom Francis (1):
      arm: dts: k3-j784s4-r5-evm: Add the PMIC ESM node

 arch/arm/dts/k3-j784s4-r5-evm.dts |  7 +++++++
 board/ti/j784s4/evm.c             | 28 ++++++++++++++++++++++++++++
 configs/j784s4_evm_r5_defconfig   |  7 +++++++
 3 files changed, 42 insertions(+)
---
base-commit: 1630ff26cc960439b5949b80cfc604a2c8aa47dd
change-id: 20240906-j784s4-esm-enable-4c4f698fe7c4

Best regards,
-- 
Andrew Halaney <ahala...@redhat.com>

Reply via email to