Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.
The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.
The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.
The changes were tested on real hardware as well on QEMU v9.0:
qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
-pflash secure-world.rom \
-pflash unsecure-world.rom
qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic
Please note that the current implementation still requires a DTB to be
provided to U-Boot and that the DTB is used within U-Boot to load drivers,
to disable/enable certain hardware blocks in ACPI. The DTB is not passed
to the OS when using the bootefi cmd.
Tested against FWTS V24.03.00.
Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
USB or ethernet devices!
- The SMP bringup doesn't work on real hardware, but works in QEMU.
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
Linux kernel module doesn't support ACPI yet.
Maximilian Brune (3):
acpi: x86: Move SPCR and DBG2 into common code
acpi: x86: Write FADT in common code
serial: serial_pl01x: Implement .getinfo() for PL01
Patrick Rudolph (23):
acpi: x86: Move MADT to common code
acpi: Fix typo
acpi: Add define for GTDT
arm: acpi: Add generic ACPI methods
acpi: Add fill_madt to acpi_ops
acpi: acpi_table: Bump revisions
acpi: Add ACPITAB for PPTT and GTDT
acpi: acpi_table: Add IORT support
acpi: Move function prototype
acpi: acpi_table: Support ACPI 2.0 platforms
efi_loader: Install ACPI tables
acpi: Add processor device
drivers: usb: Add generic XHCI
drivers: ata: Rename ahci_mvebu
drivers/cpu: Add generic armv8 cpu driver
common: Enable BLOBLIST_TABLES on arm
board: emulation: Add QEMU sbsa support
arm: mach-bcm283x: Map the ARM local MMIO as well
arm: bcm283x: Generate ACPI tables
arm: cpu: Add ACPI parking protocol support
arm: mach-bcm283x: Add ARMV8_MULTIENTRY support
arm: mach-bcm283x: Enable ARMV8_MULTIENTRY
configs: Add RPI4 ACPI defconfig
Simon Glass (2):
arm: mach-bcm283x: Bring in some header files from tianocore
board: raspberrypi: Add ASL files from tianocore
MAINTAINERS | 2 +-
arch/arm/Kconfig | 2 +
arch/arm/cpu/armv8/Makefile | 1 +
arch/arm/cpu/armv8/acpi_park_v8.S | 107 ++++
arch/arm/cpu/armv8/start.S | 4 +
arch/arm/dts/qemu-sbsa.dts | 49 ++
arch/arm/include/asm/acpi_table.h | 160 +++++
arch/arm/include/asm/arch-qemu-sbsa/boot0.h | 33 +
arch/arm/lib/Makefile | 1 +
arch/arm/lib/acpi_table.c | 237 +++++++
arch/arm/mach-bcm283x/Kconfig | 4 +
arch/arm/mach-bcm283x/Makefile | 4 +
arch/arm/mach-bcm283x/bcm2711_acpi.c | 149 +++++
.../mach-bcm283x/include/mach/acpi/bcm2711.h | 152 +++++
.../mach-bcm283x/include/mach/acpi/bcm2836.h | 127 ++++
.../include/mach/acpi/bcm2836_gpio.h | 19 +
.../include/mach/acpi/bcm2836_gpu.h | 47 ++
.../include/mach/acpi/bcm2836_pwm.h | 33 +
.../include/mach/acpi/bcm2836_sdhost.h | 18 +
.../include/mach/acpi/bcm2836_sdio.h | 21 +
arch/arm/mach-bcm283x/init.c | 10 +-
arch/arm/mach-qemu/Kconfig | 36 +-
arch/sandbox/lib/Makefile | 9 +-
arch/sandbox/lib/acpi_table.c | 7 +
arch/x86/cpu/apollolake/acpi.c | 20 +-
arch/x86/cpu/baytrail/acpi.c | 17 +-
arch/x86/cpu/intel_common/acpi.c | 20 +-
arch/x86/cpu/quark/acpi.c | 19 +-
arch/x86/cpu/tangier/acpi.c | 31 +-
arch/x86/include/asm/acpi_table.h | 28 +-
arch/x86/lib/acpi_table.c | 243 +-------
board/emulation/qemu-arm/MAINTAINERS | 2 +
board/emulation/qemu-sbsa/Kconfig | 56 ++
board/emulation/qemu-sbsa/Makefile | 8 +
board/emulation/qemu-sbsa/acpi.c | 244 ++++++++
board/emulation/qemu-sbsa/dsdt.asl | 483 +++++++++++++++
board/emulation/qemu-sbsa/lowlevel_init.S | 22 +
board/emulation/qemu-sbsa/qemu-sbsa.c | 422 +++++++++++++
board/emulation/qemu-sbsa/qemu-sbsa.env | 14 +
board/emulation/qemu-sbsa/qemu-sbsa.h | 38 ++
board/emulation/qemu-sbsa/smc.c | 72 +++
board/raspberrypi/rpi/.gitignore | 3 +
board/raspberrypi/rpi/Makefile | 2 +
board/raspberrypi/rpi/acpitables.h | 90 +++
board/raspberrypi/rpi/dsdt.asl | 290 +++++++++
board/raspberrypi/rpi/emmc.asl | 136 +++++
board/raspberrypi/rpi/gpudevs.asl | 372 +++++++++++
board/raspberrypi/rpi/pci.asl | 177 ++++++
board/raspberrypi/rpi/pep.asl | 90 +++
board/raspberrypi/rpi/rhpx.asl | 195 ++++++
board/raspberrypi/rpi/rpi.c | 183 ++++++
board/raspberrypi/rpi/sdhc.asl | 111 ++++
board/raspberrypi/rpi/uart.asl | 208 +++++++
boot/bootflow.c | 8 +-
common/Kconfig | 1 +
configs/clearfog_defconfig | 2 +-
configs/clearfog_gt_8k_defconfig | 2 +-
configs/clearfog_sata_defconfig | 2 +-
configs/clearfog_spi_defconfig | 2 +-
configs/db-88f6820-gp_defconfig | 2 +-
configs/ds116_defconfig | 2 +-
configs/helios4_defconfig | 2 +-
configs/mvebu_crb_cn9130_defconfig | 2 +-
configs/mvebu_db-88f3720_defconfig | 2 +-
configs/mvebu_db_armada8k_defconfig | 2 +-
configs/mvebu_db_cn9130_defconfig | 2 +-
configs/mvebu_espressobin-88f3720_defconfig | 2 +-
.../mvebu_espressobin_ultra-88f3720_defconfig | 2 +-
configs/mvebu_mcbin-88f8040_defconfig | 2 +-
configs/mvebu_puzzle-m801-88f8040_defconfig | 2 +-
configs/n2350_defconfig | 2 +-
configs/octeon_nic23_defconfig | 2 +-
configs/qemu-arm-sbsa_defconfig | 10 +
configs/rpi_4_acpi_defconfig | 72 +++
configs/turris_omnia_defconfig | 2 +-
doc/board/emulation/index.rst | 1 +
doc/board/emulation/qemu-sbsa.rst | 98 +++
doc/develop/driver-model/virtio.rst | 1 +
drivers/ata/Kconfig | 12 +-
drivers/ata/Makefile | 2 +-
drivers/ata/{ahci_mvebu.c => ahci_generic.c} | 17 +-
drivers/core/acpi.c | 16 +
drivers/cpu/Kconfig | 6 +
drivers/cpu/Makefile | 3 +
drivers/cpu/armv8_cpu.c | 90 +++
drivers/cpu/bcm283x_cpu.c | 194 ++++++
drivers/pci/pcie_brcmstb.c | 101 +--
drivers/serial/serial_pl01x.c | 24 +
drivers/usb/host/Kconfig | 8 +
drivers/usb/host/Makefile | 1 +
drivers/usb/host/xhci-generic.c | 88 +++
include/acpi/acpi_table.h | 324 +++++++++-
include/acpi/acpigen.h | 12 +
include/bloblist.h | 1 +
include/configs/qemu-sbsa.h | 97 +++
include/dm/acpi.h | 26 +
include/serial.h | 1 +
lib/Kconfig | 30 +-
lib/acpi/acpi_table.c | 577 ++++++++++++++++--
lib/acpi/acpigen.c | 11 +
lib/efi_loader/efi_acpi.c | 57 +-
test/dm/acpi.c | 42 ++
test/py/tests/test_event_dump.py | 1 +
103 files changed, 6262 insertions(+), 534 deletions(-)
create mode 100644 arch/arm/cpu/armv8/acpi_park_v8.S
create mode 100644 arch/arm/dts/qemu-sbsa.dts
create mode 100644 arch/arm/include/asm/arch-qemu-sbsa/boot0.h
create mode 100644 arch/arm/lib/acpi_table.c
create mode 100644 arch/arm/mach-bcm283x/bcm2711_acpi.c
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2711.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpio.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_gpu.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_pwm.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdhost.h
create mode 100644 arch/arm/mach-bcm283x/include/mach/acpi/bcm2836_sdio.h
create mode 100644 arch/sandbox/lib/acpi_table.c
create mode 100644 board/emulation/qemu-sbsa/Kconfig
create mode 100644 board/emulation/qemu-sbsa/Makefile
create mode 100644 board/emulation/qemu-sbsa/acpi.c
create mode 100644 board/emulation/qemu-sbsa/dsdt.asl
create mode 100644 board/emulation/qemu-sbsa/lowlevel_init.S
create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.c
create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.env
create mode 100644 board/emulation/qemu-sbsa/qemu-sbsa.h
create mode 100644 board/emulation/qemu-sbsa/smc.c
create mode 100644 board/raspberrypi/rpi/.gitignore
create mode 100644 board/raspberrypi/rpi/acpitables.h
create mode 100644 board/raspberrypi/rpi/dsdt.asl
create mode 100644 board/raspberrypi/rpi/emmc.asl
create mode 100644 board/raspberrypi/rpi/gpudevs.asl
create mode 100644 board/raspberrypi/rpi/pci.asl
create mode 100644 board/raspberrypi/rpi/pep.asl
create mode 100644 board/raspberrypi/rpi/rhpx.asl
create mode 100644 board/raspberrypi/rpi/sdhc.asl
create mode 100644 board/raspberrypi/rpi/uart.asl
create mode 100644 configs/qemu-arm-sbsa_defconfig
create mode 100644 configs/rpi_4_acpi_defconfig
create mode 100644 doc/board/emulation/qemu-sbsa.rst
rename drivers/ata/{ahci_mvebu.c => ahci_generic.c} (71%)
create mode 100644 drivers/cpu/armv8_cpu.c
create mode 100644 drivers/cpu/bcm283x_cpu.c
create mode 100644 drivers/usb/host/xhci-generic.c
create mode 100644 include/configs/qemu-sbsa.h
--
2.45.2
