On Thu, Aug 29, 2024 at 08:23:57AM -0300, Hiago De Franco wrote: > From: Rogerio Guerra Borin <rogerio.bo...@toradex.com> > > Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and > verdin-imx8mp configurations to specify the load address for FIT images > loaded by the SPL. > > As per lastest instructions from NXP, the generation of a HABv4 CSF > (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load > address to be set to a fixed value when binman is used. The address is > defined by CONFIG_SPL_LOAD_FIT_ADDRESS. > > Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the > start of the DDR memory leaving plenty of room for the various DDR- > residing artifacts to be moved to their usual load addresses which are > close to the start of the DDR. > > Signed-off-by: Rogerio Guerra Borin <rogerio.bo...@toradex.com> > Signed-off-by: Hiago De Franco <hiago.fra...@toradex.com>
Acked-by: Francesco Dolcini <francesco.dolc...@toradex.com> Francesco
