From: Rogerio Guerra Borin <rogerio.bo...@toradex.com> Set the CONFIG_SPL_LOAD_FIT_ADDRESS for both verdin-imx8mm and verdin-imx8mp configurations to specify the load address for FIT images loaded by the SPL.
As per lastest instructions from NXP, the generation of a HABv4 CSF (Command Sequence File) requires the U-Boot FIT image (u-boot.itb) load address to be set to a fixed value when binman is used. The address is defined by CONFIG_SPL_LOAD_FIT_ADDRESS. Here we set CONFIG_SPL_LOAD_FIT_ADDRESS to an address 64MB past the start of the DDR memory leaving plenty of room for the various DDR- residing artifacts to be moved to their usual load addresses which are close to the start of the DDR. Signed-off-by: Rogerio Guerra Borin <rogerio.bo...@toradex.com> Signed-off-by: Hiago De Franco <hiago.fra...@toradex.com> --- configs/verdin-imx8mm_defconfig | 1 + configs/verdin-imx8mp_defconfig | 1 + 2 files changed, 2 insertions(+) diff --git a/configs/verdin-imx8mm_defconfig b/configs/verdin-imx8mm_defconfig index ef7f3b1bc10d..a6f92f3d070e 100644 --- a/configs/verdin-imx8mm_defconfig +++ b/configs/verdin-imx8mm_defconfig @@ -29,6 +29,7 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 CONFIG_OF_SYSTEM_SETUP=y diff --git a/configs/verdin-imx8mp_defconfig b/configs/verdin-imx8mp_defconfig index fca91f7b1eee..594fea3a1b03 100644 --- a/configs/verdin-imx8mp_defconfig +++ b/configs/verdin-imx8mp_defconfig @@ -38,6 +38,7 @@ CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_FIT_VERBOSE=y CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_LOAD_FIT_ADDRESS=0x44000000 CONFIG_DISTRO_DEFAULTS=y CONFIG_BOOTDELAY=1 CONFIG_OF_SYSTEM_SETUP=y -- 2.39.2
