Hi Jonas,
On 6/17/24 3:44 PM, Jonas Karlman wrote:
Hi Quentin,
On 2024-06-17 15:29, Quentin Schulz wrote:
Hi Jonas,
On 6/17/24 3:26 PM, Jonas Karlman wrote:
Hi Quentin,
On 2024-06-17 15:10, Quentin Schulz wrote:
From: Quentin Schulz <quentin.sch...@cherry.de>
In commit 100f489f58a6 ("rockchip: rk3399: Fix loading FIT from SD-card
when booting from eMMC"), the spi1 bootph properties were mistakenly
removed meaning, so re-add them back to fix SPI-NOR flash not being
found in U-Boot pre-reloc as required for RK3399 Puma.
Good catch, for TPL/SPL the bootph props is propagated, something that
is not done for pre-reloc.
Can you tell us a bit more about this? I know that the pinctrl nodes
marked for pre-reloc recursively apply the same to their parent, but
couldn't find anything similar for other subsystems for example. What
did I miss in my 5m search?
v2024.04-rc1 added support to propagate bootph props using fdtgrep for
the u-boot-tpl/spl.dtb files, however pre-reloc the main u-boot.dtb (or
possible the FDT included in FIT) that is not processed by fdtgrep.
fdtgrep: Allow propagating properties up to supernodes
https://source.denx.de/u-boot/u-boot/-/commit/7a06cc2027c0169c462da63a68fa269c0d59a950
Makefile: Use the fdtgrep -u flag
https://source.denx.de/u-boot/u-boot/-/commit/aca95282c1b72c41d8e72984b1dceb15f396b2f8
Thanks for the pointers!
I'm wondering if we shouldn't do the same for U-Boot proper DTB as well?
i.e.
cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@
to
cmd_fdt_rm_props = $(objtree)/tools/fdtgrep $(fdtgrep_props) -u $< |
$(objtree)/tools/fdtgrep -r -O dtb - -o $@
I assume we need to add a bunch more options though.
But that would make sense to me, the fact that there's a pre-reloc stage
in U-Boot proper is already a bit odd (to me), but if we have something
that behaves differently than the pre-reloc stage in earlier stages...
I'm not sure this is a good idea?
While at it, I'm wondering if we didn't miss the removal of
bootph-some-ram in cmd_fdtgrep for the VPL/SPL/TPL?
Additionally, we should be able to remove bootph-pre-sram and
bootph-pre-ram in U-Boot proper DT since those only apply to non-U-Boot
proper stages, don't you think?
Cheers,
Quentin
