Dear Minku, Please ignore this patch. As i have removed #define GPIO_DRV_FAST 0x0 #define GPIO_DRV_SLOW 0x1
as these are not defined for s5pc2xx. But being reffered in s5p_gpio.c. I will add again and send the patch. Regards, Chander On 18 April 2011 09:31, Chander Kashyap <chander.kash...@linaro.org> wrote: > Macro values for Pull Up and Driver Strength were wrong. > > Signed-off-by: Chander Kashyap <chander.kash...@linaro.org> > --- > arch/arm/include/asm/arch-s5pc2xx/gpio.h | 8 +++----- > 1 files changed, 3 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h > b/arch/arm/include/asm/arch-s5pc2xx/gpio.h > index 05e5b3e..e49edd4 100644 > --- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h > +++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h > @@ -99,14 +99,12 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int > gpio, int mode); > /* Pull mode */ > #define GPIO_PULL_NONE 0x0 > #define GPIO_PULL_DOWN 0x1 > -#define GPIO_PULL_UP 0x2 > +#define GPIO_PULL_UP 0x3 > > /* Drive Strength level */ > #define GPIO_DRV_1X 0x0 > -#define GPIO_DRV_2X 0x1 > -#define GPIO_DRV_3X 0x2 > +#define GPIO_DRV_3X 0x1 > +#define GPIO_DRV_2X 0x2 > #define GPIO_DRV_4X 0x3 > -#define GPIO_DRV_FAST 0x0 > -#define GPIO_DRV_SLOW 0x1 > > #endif > -- > 1.7.1 > >
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
