On Fri, Apr 26, 2024 at 10:25 AM Marek Vasut <ma...@denx.de> wrote:
>
> On 4/26/24 7:12 PM, Tim Harvey wrote:
> > eMMC devices have hardware partitions such as user, boot0, and boot1.
> > Allow these names to be displayed when reading the mmc PARTITION_CONFIG
> > field via 'mmc partconf'. Additionally allow a name to be specified when
> > setting the PARTITION_CONFIG.
> >
> > Before:
> > u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
> > EXT_CSD[179], PARTITION_CONFIG:
> > BOOT_ACK: 0x1
> > BOOT_PARTITION_ENABLE: 0x2
> > PARTITION_ACCESS: 0x0
> >
> > After:
> > u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
> > EXT_CSD[179], PARTITION_CONFIG:
> > BOOT_ACK: 0x1
> > BOOT_PARTITION_ENABLE: 0x1 (boot0)
> > PARTITION_ACCESS: 0x0
> > u-boot=> mmc partconf 2 1 boot1 0 && mmc partconf 2
> > EXT_CSD[179], PARTITION_CONFIG:
> > BOOT_ACK: 0x1
> > BOOT_PARTITION_ENABLE: 0x2 (boot1)
> > PARTITION_ACCESS: 0x0
> >
> > Signed-off-by: Tim Harvey <thar...@gateworks.com>
> > ---
> > v2:
> > - fix typo in subject
> > - add names for gp1..gp4
> > ---
> > cmd/mmc.c | 25 ++++++++++++++++++++++---
> > 1 file changed, 22 insertions(+), 3 deletions(-)
> >
> > diff --git a/cmd/mmc.c b/cmd/mmc.c
> > index 2d5430a53079..af9a66cc6df4 100644
> > --- a/cmd/mmc.c
> > +++ b/cmd/mmc.c
> > @@ -14,6 +14,18 @@
> > #include <part.h>
> > #include <sparse_format.h>
> > #include <image-sparse.h>
> > +#include <linux/ctype.h>
> > +
> > +static const char *mmc_partnames[] = {
> > + "user",
> > + "boot0",
> > + "boot1",
> > + "gp1",
> > + "gp2",
> > + "gp3",
> > + "gp4",
>
> Uh, maybe gp%d are indexed from zero too ?
>
> (sorry for the confusion)
but 'mmc hwpartition' does not list them 0 based:
u-boot=> mmc hwpartition
switch to partitions #0, OK
mmc2(part 0) is current device
Partition configuration:
No enhanced user data area
No GP1 partition
No GP2 partition
No GP3 partition
No GP4 partition
I'm ok with either, I'm just not sure what is more understandable and standard.
Tim
