After the commit aca95282c1b7 ("Makefile: Use the fdtgrep -u flag")
bootph props is propagating to parent nodes.
Update bootph props to ensure eMMC, SD-card and SPI flash is available
in SPL and U-Boot proper pre-reloc phase also remove unneeded bootph
props that automatically is propagated to parent nodes.
Also adjust pinctrl nodes to only be included in boot phases where they
are needed and add any missing pinctrl node needed in SPL.
Signed-off-by: Jonas Karlman <jo...@kwiboo.se>
---
v2: Add bootph-some-ram props and follow kernel sort order
Following bootph props have been applied:
CRU, GRF and UART nodes:
- bootph-all - needed at all or most stages
SD-card regulator related nodes:
- bootph-pre-ram (SPL) - regulator pinctrl may be needed to read FIT
from SD-card on some boards
eMMC/SD-card/SPI flash related nodes:
- bootph-pre-ram (SPL)
- bootph-some-ram (U-Boot proper pre-reloc)
---
.../arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi | 8 +--
arch/arm/dts/rk3588-generic.dts | 1 +
arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi | 12 ++---
.../dts/rk3588-orangepi-5-plus-u-boot.dtsi | 7 ++-
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 8 +--
arch/arm/dts/rk3588-turing-rk1-u-boot.dtsi | 6 ++-
arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi | 8 +--
arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi | 9 ++--
arch/arm/dts/rk3588s-u-boot.dtsi | 50 ++++++++++++++-----
configs/evb-rk3588_defconfig | 4 +-
10 files changed, 71 insertions(+), 42 deletions(-)
diff --git a/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
index ed15b14ea0ee..f0ef0164664e 100644
--- a/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-coolpi-cm5-evb-u-boot.dtsi
@@ -3,7 +3,8 @@
#include "rk3588-u-boot.dtsi"
&fspim2_pins {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdhci {
@@ -12,16 +13,15 @@
};
&sfc {
- bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
pinctrl-names = "default";
pinctrl-0 = <&fspim2_pins>;
status = "okay";
flash@0 {
- bootph-pre-ram;
compatible = "jedec,spi-nor";
reg = <0>;
+ bootph-pre-ram;
+ bootph-some-ram;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/rk3588-generic.dts b/arch/arm/dts/rk3588-generic.dts
index e4721d97a87d..baafe7463f1b 100644
--- a/arch/arm/dts/rk3588-generic.dts
+++ b/arch/arm/dts/rk3588-generic.dts
@@ -40,5 +40,6 @@
};
&uart2 {
+ pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
diff --git a/arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi
b/arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi
index 60494bb8485f..968385622fa5 100644
--- a/arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-nanopc-t6-u-boot.dtsi
@@ -7,12 +7,11 @@
#include "rk3588-u-boot.dtsi"
&fspim1_pins {
- bootph-all;
-};
-
-&sfc {
bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
+ bootph-some-ram;
+};
+
+&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspim1_pins>;
#address-cells = <1>;
@@ -20,9 +19,10 @@
status = "okay";
flash@0 {
- bootph-pre-ram;
compatible = "jedec,spi-nor";
reg = <0>;
+ bootph-pre-ram;
+ bootph-some-ram;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi
b/arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi
index 5d5fa6ffb214..1ab31a4ec5ab 100644
--- a/arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi
@@ -3,7 +3,8 @@
#include "rk3588-u-boot.dtsi"
&fspim1_pins {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdhci {
@@ -12,10 +13,8 @@
};
&sfc {
- bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
-
flash@0 {
bootph-pre-ram;
+ bootph-some-ram;
};
};
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
index 9ee9dd051e32..d6020ca790f6 100644
--- a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
@@ -18,7 +18,8 @@
};
&fspim2_pins {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&pinctrl {
@@ -35,16 +36,15 @@
};
&sfc {
- bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
pinctrl-names = "default";
pinctrl-0 = <&fspim2_pins>;
status = "okay";
flash@0 {
- bootph-pre-ram;
compatible = "jedec,spi-nor";
reg = <0>;
+ bootph-pre-ram;
+ bootph-some-ram;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/rk3588-turing-rk1-u-boot.dtsi
b/arch/arm/dts/rk3588-turing-rk1-u-boot.dtsi
index ca2a684f3541..a50bcc45f216 100644
--- a/arch/arm/dts/rk3588-turing-rk1-u-boot.dtsi
+++ b/arch/arm/dts/rk3588-turing-rk1-u-boot.dtsi
@@ -12,6 +12,10 @@
};
&uart9 {
- bootph-pre-ram;
+ bootph-all;
clock-frequency = <24000000>;
};
+
+&uart9m0_xfer {
+ bootph-all;
+};
diff --git a/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
index 6e4b97028d7c..f51d7f30d787 100644
--- a/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-coolpi-4b-u-boot.dtsi
@@ -3,7 +3,8 @@
#include "rk3588s-u-boot.dtsi"
&fspim2_pins {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdhci {
@@ -12,16 +13,15 @@
};
&sfc {
- bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
pinctrl-names = "default";
pinctrl-0 = <&fspim2_pins>;
status = "okay";
flash@0 {
- bootph-pre-ram;
compatible = "jedec,spi-nor";
reg = <0>;
+ bootph-pre-ram;
+ bootph-some-ram;
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
b/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
index 888d1b9c12d7..12a92c0cba10 100644
--- a/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
@@ -9,14 +9,13 @@
};
&fspim0_pins {
- bootph-all;
-};
-
-&sfc {
bootph-pre-ram;
- u-boot,spl-sfc-no-dma;
+ bootph-some-ram;
+};
+&sfc {
flash@0 {
bootph-pre-ram;
+ bootph-some-ram;
};
};
diff --git a/arch/arm/dts/rk3588s-u-boot.dtsi b/arch/arm/dts/rk3588s-u-boot.dtsi
index 543327954b1a..f837239d2747 100644
--- a/arch/arm/dts/rk3588s-u-boot.dtsi
+++ b/arch/arm/dts/rk3588s-u-boot.dtsi
@@ -121,31 +121,40 @@
};
&cru {
- bootph-pre-ram;
+ bootph-all;
};
&emmc_bus8 {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&emmc_clk {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&emmc_cmd {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&emmc_data_strobe {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&emmc_rstnout {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&ioc {
- bootph-pre-ram;
+ bootph-all;
+};
+
+&pcfg_pull_down {
+ bootph-all;
};
&pcfg_pull_none {
@@ -157,6 +166,11 @@
};
&pcfg_pull_up_drv_level_2 {
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&php_grf {
bootph-all;
};
@@ -170,10 +184,12 @@
&scmi {
bootph-pre-ram;
+ bootph-some-ram;
};
&scmi_clk {
bootph-pre-ram;
+ bootph-some-ram;
};
&sdhci {
@@ -189,27 +205,35 @@
};
&sdmmc_bus4 {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_clk {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_cmd {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
};
&sdmmc_det {
- bootph-all;
+ bootph-pre-ram;
+ bootph-some-ram;
+};
+
+&sfc {
+ u-boot,spl-sfc-no-dma;
};
&sys_grf {
- bootph-pre-ram;
+ bootph-all;
};
&uart2 {
- bootph-pre-ram;
+ bootph-all;
clock-frequency = <24000000>;
};
diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig
index 68ecbc54b807..610a8d740fbb 100644
--- a/configs/evb-rk3588_defconfig
+++ b/configs/evb-rk3588_defconfig
@@ -33,7 +33,8 @@ CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names
interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
+CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
@@ -52,6 +53,7 @@ CONFIG_DWC_ETH_QOS_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_PHY_ROCKCHIP_USBDP=y
+CONFIG_SPL_PINCTRL=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_BAUDRATE=1500000
--
2.43.2
