Hi Marek,
On 3/27/24 17:23, Marek Behún wrote:
Hi Stefan,
this is v3 of series adding support for new board revision of Turris
Omnia.
Changes since v2:
- patch 2: updated MCU command interface header
- patch 6: fixed bug setting \0 as end of string in src array instead
of dst array after bin2hex() call
- patch 16: updated commit message (added the bit about ctrl+c)
v1 and v2 at:
https://patchwork.ozlabs.org/project/uboot/cover/20240304152148.3847-1-ka...@kernel.org/
https://patchwork.ozlabs.org/project/uboot/cover/20240323180711.5498-1-ka...@kernel.org/
After pushing there changes in my current master I get these build
errors for "turris_omnia_defconfig":
make[1]: *** No rule to make target
'board/CZ.NIC/turris_omnia/../turris_common.o', needed by
'board/CZ.NIC/turris_omnia/built-in.o'. Stop.
make[1]: *** Waiting for unfinished jobs....
board/CZ.NIC/turris_omnia/../turris_atsha_otp.c:14:10: fatal error:
turris_common.h: No such file or directory
14 | #include "turris_common.h"
| ^~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.build:257:
board/CZ.NIC/turris_omnia/../turris_atsha_otp.o] Error 1
board/CZ.NIC/turris_omnia/turris_omnia.c:36:10: fatal error:
../turris_common.h: No such file or directory
36 | #include "../turris_common.h"
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
Available here:
https://source.denx.de/u-boot/custodians/u-boot-marvell/-/commits/master?ref_type=heads
Could you please have a look?
Thanks,
Stefan
Marek Behún (18):
arm: mvebu: turris_omnia: Enable LTO by default on Turris Omnia
arm: mvebu: turris_omnia: Add header containing MCU command interface
and use it
arm: mvebu: turris_{omnia, mox}: Don't print model two times
arm: mvebu: turris_omnia: Update MCU status and features reading
arm: mvebu: turris_omnia: Implement getting board information from MCU
arm: mvebu: turris_omnia: Print board ECDSA public key if available
arm: mvebu: turris_omnia: Disable Atmel SHA node if not present
arm: mvebu: spl: Do not build mvebu-reset in SPL
arm: mvebu: system-controller: Rework to use UCLASS_SYSCON
arm: mvebu: system-controller: Select mvebu-reset if DM_RESET &&
PCI_MVEBU
arm: mvebu: system-controller: Add support for SYSRESET
gpio: turris_omnia_mcu: Use byteorder conversion functions
gpio: turris_omnia_mcu: Update firmware features reading
gpio: turris_omnia_mcu: Add support for system power off via sysreset
arm: mvebu: turris_omnia: Enable poweroff command via sysreset in
defconfig
cmd: rng: Print "Abort" on -EINTR
misc: turris_omnia_mcu: Add support for rng provided by MCU
arm: mvebu: turris_omnia: Enable rng command in defconfig
arch/arm/mach-mvebu/Kconfig | 25 ++
arch/arm/mach-mvebu/Makefile | 3 +-
arch/arm/mach-mvebu/cpu.c | 2 +
arch/arm/mach-mvebu/system-controller.c | 144 ++++++--
board/CZ.NIC/turris_atsha_otp.c | 27 +-
board/CZ.NIC/turris_mox/turris_mox.c | 5 +-
board/CZ.NIC/turris_omnia/Makefile | 2 +-
board/CZ.NIC/turris_omnia/turris_omnia.c | 310 ++++++++++++-----
cmd/rng.c | 7 +-
configs/turris_omnia_defconfig | 6 +
drivers/gpio/Kconfig | 7 -
drivers/gpio/Makefile | 1 -
drivers/gpio/turris_omnia_mcu.c | 316 -----------------
drivers/misc/Kconfig | 11 +
drivers/misc/Makefile | 1 +
drivers/misc/turris_omnia_mcu.c | 411 +++++++++++++++++++++++
include/turris-omnia-mcu-interface.h | 248 ++++++++++++++
17 files changed, 1044 insertions(+), 482 deletions(-)
delete mode 100644 drivers/gpio/turris_omnia_mcu.c
create mode 100644 drivers/misc/turris_omnia_mcu.c
create mode 100644 include/turris-omnia-mcu-interface.h
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de
