Chromebook bob and kevin only use SPL and not TPL+SPL like other RK3399 boards, this mean that SPL is loaded to and run from SRAM instead of DRAM. The SPL and U-Boot payload is loaded from SPI flash.
The U-Boot payload is located at 0x40000 (256 KiB) offset in SPI flash and because the BROM only read first 2 KiB for each 4 KiB page, the size of SPL (idbloader.img) is limited to max 128 KiB. The chosen bss start address further limits the size of SPL to 120 KiB. 0xff8e0000 (SPL_BSS_START_ADDR) - 0xff8c2000 (SPL_TEXT_BASE) = 0x1e000 Update SPL_MAX_SIZE to reflect the 120 KiB max size limitation. Signed-off-by: Jonas Karlman <jo...@kwiboo.se> --- configs/chromebook_bob_defconfig | 2 +- configs/chromebook_kevin_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/configs/chromebook_bob_defconfig b/configs/chromebook_bob_defconfig index d0321948697b..58e76f11472c 100644 --- a/configs/chromebook_bob_defconfig +++ b/configs/chromebook_bob_defconfig @@ -30,7 +30,7 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_BLOBLIST=y CONFIG_BLOBLIST_ADDR=0x100000 CONFIG_BLOBLIST_SIZE=0x1000 -CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_MAX_SIZE=0x1e000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xff8e0000 diff --git a/configs/chromebook_kevin_defconfig b/configs/chromebook_kevin_defconfig index 120c11c04972..5adc276a746a 100644 --- a/configs/chromebook_kevin_defconfig +++ b/configs/chromebook_kevin_defconfig @@ -31,7 +31,7 @@ CONFIG_BOARD_EARLY_INIT_R=y CONFIG_BLOBLIST=y CONFIG_BLOBLIST_ADDR=0x100000 CONFIG_BLOBLIST_SIZE=0x1000 -CONFIG_SPL_MAX_SIZE=0x2e000 +CONFIG_SPL_MAX_SIZE=0x1e000 CONFIG_SPL_PAD_TO=0x7f8000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0xff8e0000 -- 2.43.2
