On 2/26/24 4:05 PM, Paul Barker wrote:
The RZ/G2L SMARC module is powered via a Renesas RAA215300 PMIC which
provides several voltage converters, a real time clock (RTC) and reset
control. A basic driver is implemented for this device so that we can
read, write and dump the PMIC registers.
The raa215300_bind() function is added as a stub, binding of the
sysreset driver will be added in a later patch.
Additional features of this PMIC (such as reset control) may be
supported by future patches.
Signed-off-by: Paul Barker <paul.barker...@bp.renesas.com>
---
configs/renesas_rzg2l_smarc_defconfig | 3 ++
drivers/power/pmic/Kconfig | 9 ++++++
drivers/power/pmic/Makefile | 1 +
drivers/power/pmic/raa215300.c | 41 +++++++++++++++++++++++++++
4 files changed, 54 insertions(+)
create mode 100644 drivers/power/pmic/raa215300.c
diff --git a/configs/renesas_rzg2l_smarc_defconfig
b/configs/renesas_rzg2l_smarc_defconfig
index ad46297c6619..2cab79329db4 100644
--- a/configs/renesas_rzg2l_smarc_defconfig
+++ b/configs/renesas_rzg2l_smarc_defconfig
@@ -27,6 +27,7 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
+CONFIG_CMD_PMIC=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
@@ -49,6 +50,8 @@ CONFIG_DM_I2C=y
CONFIG_MMC_IO_VOLTAGE=y
CONFIG_MMC_UHS_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RAA215300=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
Would it be possible to split the enablement (config change) from the
driver in two separate patches ?
