Hi Scott,
In order to use the USB-Ethernet in u-boot, what do we need to set
ethact to? I would be great if you could show an example.
Of all the device below, which ones have actually been tested and known
to work?
{ 0x05ac, 0x1402 }, /* Apple USB Ethernet Adapter */
{ 0x07d1, 0x3c05 }, /* D-Link DUB-E100 H/W Ver B1 */
{ 0x0b95, 0x772a }, /* Cables-to-Go USB Ethernet Adapter */
{ 0x0b95, 0x7720 }, /* Trendnet TU2-ET100 V3.0R */
{ 0x0b95, 0x1720 }, /* SMC */
{ 0x0db0, 0xa877 }, /* MSI - ASIX 88772a */
{ 0x077b, 0x2226 }, /* Linksys 200M */
{ 0x13b1, 0x0018 }, /* Linksys 200M v2.1 */
{ 0x1557, 0x7720 }, /* 0Q0 cable ethernet */
{ 0x2001, 0x3c05 }, /* DLink DUB-E100 H/W Ver B1 Alternate */
{ 0x0000, 0x0000 } /* END - Do not remove */
Thanks much.
Rick
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
