On Mon, Feb 12, 2024 at 9:53 AM Nishanth Menon <n...@ti.com> wrote: > > Enable the external 32k crystal similar to that found on other > production AM62X board. The trim settings for the crystal is board > dependent, so the sequences tend to be board specific. Since this is > a configuration that needs to be done prior to DM managing the system > and all other muxes get set, do the same from R5 context. > > Signed-off-by: Nishanth Menon <n...@ti.com>
Tested-by: Robert Nelson <robertcnel...@gmail.com> Yay, WiFi (wl18xx) now works on the BeaglePay with these 4 patches on top of v2024.01-rc1 debian@BeaglePlay-57:~$ dmesg | grep wl [ 1.892839] wlan_en: supplied by vdd_3v3 [ 8.437425] systemd[1]: Expecting device sys-subsystem-net-devices-wlan0.device - /sys/subsystem/net/devices/wlan0... [ 13.241739] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11) [ 13.246116] wlcore: WARNING Detected unconfigured mac address in nvs, derive from fuse instead. [ 13.246155] wlcore: WARNING This default nvs file can be removed from the file system [ 13.253088] wlcore: loaded [ 13.788451] wlcore: using inverted interrupt logic: 2 [ 13.842464] wlcore: PHY firmware version: Rev 8.2.0.0.243 [ 13.938371] wlcore: firmware booted (Rev 8.9.0.0.83) Regards, -- Robert Nelson https://rcn-ee.com/
