Hi Simon,
I noticed that you have:
{ 0x13b1, 0x0018 }, /* Linksys 200M v2.1 */
in asix.c
What would it take to add:
Bus 002 Device 004: ID 077b:2226 Linksys USB200M 100baseTX Adapter
A work friend has been trying this device:
{ 0x0b95, 0x1720 }, /* SMC */
But that doesn't work either.
Maybe we're doing something wrong. Here's what he gets (the lights
never come on on his SMC dongle):
---------------------------------------------------------------
OMAP3_EVM # usb start
(Re)start USB...
USB: scanning bus for devices... 1 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
scanning bus for ethernet devices... 1 Ethernet Device(s) found
OMAP3_EVM # usb info
1: See Interface, USB Revision 2.0
- SMC SMC2209USB/ETH
- Class: Communication
- PacketSize: 64 Configurations: 1
- Vendor: 0x0b95 Product 0x1720 Version 0.1
Configuration: 1
- Interfaces: 1 Bus Powered Remote Wakeup 300mA
Interface: 0
- Alternate Setting 0, Endpoints: 3
- Class See Interface
- Endpoint 1 In Interrupt MaxPacket 8 Interval 11ms
- Endpoint 2 Out Bulk MaxPacket 512
- Endpoint 3 In Bulk MaxPacket 512
---------------------------------------------------------------
If we try to do anything with the network (ie tftp), it doesn't work, do we
need to set ethact to something?
Thanks for any help.
Rick Bronson
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
