Hi Apurva et al, On Wed, Jan 3, 2024 at 4:53 PM Nishanth Menon <n...@ti.com> wrote: > > On 09:37-20240103, Nishanth Menon wrote: > > On 00:45-20231220, Apurva Nandan wrote: > > > Hello Everyone! > > > > > > This series will introduce basic support (SD and UART) support for Texas > > > Instruments J784S4 EVM. > > > > > > The J784S4 SoC device tree patches are taken from kernel patch submissions > > > and will be updated as they are accepted and merged to the kernel tree. > > > All other patches are specific to SPL and u-boot and do not have > > > dependency on other trees. Appreciate a review for acceptance to u-boot > > > tree. > > > > > > Here are some of the salient features of the J784S4 automotive grade > > > application processor: > > > > > > The J784S4 SoC belongs to the K3 Multicore SoC architecture > > > platform, providing advanced system integration in automotive, > > > ADAS and industrial applications requiring AI at the network edge. > > > This SoC extends the K3 Jacinto 7 family of SoCs with focus on > > > raising performance and integration while providing interfaces, > > > memory architecture and compute performance for multi-sensor, high > > > concurrency applications. > > > > > Tried to apply this series on top of: > > next dffa6d0210f5 Merge tag 'dm-next-1124' of > > https://source.denx.de/u-boot/custodians/u-boot-dm into next > > > > > > $ git am -3 > > v7_20231220_a_nandan_introduce_initial_ti_s_j784s4_and_am69_support.mbx > > Applying: arm: dts: Introduce j784s4 dts from linux kernel > > Applying: arm: dts: Introduce am69-sk dts from linux kernel > > Applying: arm: mach-k3: Add basic support for J784S4 SoC definition > > Applying: arm: mach-k3: Sort SoC JTAG_ID entries > > Applying: soc: ti: k3-socinfo: Add entry for J784S4 SoC > > Applying: arm: mach-k3: j784s4: Add clk and power support > > Applying: drivers: dma: Add support for J784S4 SoC > > Applying: board: ti: j784s4: Add board support for J784S4 EVM > > Applying: board: ti: j748s4: Add board config yaml files > > Applying: board: ti: j784s4: Add boot environment variables > > Applying: arm: dts: Introduce am69-sk u-boot dts files > > error: patch failed: arch/arm/dts/Makefile:1411 > > error: arch/arm/dts/Makefile: patch does not apply > > error: arch/arm/dts/k3-j784s4-binman.dtsi: does not exist in index > > Patch failed at 0011 arm: dts: Introduce am69-sk u-boot dts files > > hint: Use 'git am --show-current-patch=diff' to see the failed patch > > When you have resolved this problem, run "git am --continue". > > If you prefer to skip this patch, run "git am --skip" instead. > > To restore the original branch and stop patching, run "git am --abort". > > > > You will probably have to rebase this series once any review comments > > are addressed. > > Looks like public-inbox in kernel.org is missing patch[1] #11, but > patchworks[2] seems to have a copy >
Yeah, I was also hit by this one, I checked again and the patches still apply cleanly on top of the mainline u-boot. Apurva would you mind to address the few comments that the patches received, add all the reviewed tags and resend again? Once done, I think the patches will be in a good state to be merged. Thanks, Enric > Comments to follow.. > > [1] https://lore.kernel.org/all/20231219191537.4039361-1-a-nan...@ti.com/#t > [2] https://patchwork.ozlabs.org/project/uboot/list/?series=387428 > -- > Regards, > Nishanth Menon > Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 > 849D 1736 249D >
