Dear Nicholas Kinar, In message <4d92531e.4030...@usask.ca> you wrote: > > I would assume that the "fsload" command will also work with UBIFS as well.
No. UBIFS uses it's own command set; you will use "ubifsload" instead. > In my custom system, At91Bootstrap is situated on SPI Dataflash. The > At91Bootstrap loads U-Boot from the same Dataflash. Then, I would like > U-Boot to load the Linux kernel from the UBI file system on a large 2 > GByte NAND flash. This should be much better than using JFFS2 on the > large NAND flash. Indeed. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de "One day," said a dull voice from down below, "I'm going to be back in form again and you're going to be very sorry you said that. For a very long time. I might even go so far as to make even more Time just for you to be sorry in." - Terry Pratchett, _Small Gods_ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
