On Tue, 29 Mar 2011 11:37:25 -0600 Nicholas Kinar <n.ki...@usask.ca> wrote:
> On 29/03/2011 10:14 AM, Nicholas Kinar wrote: > > Also as instructed in the README.NAND, README.JFFS2 and > > README.JFFS2_NAND files found in the /doc/ directory, I've tried > > defining the following in my > > /include/configs/at91sam9rlek.h configuration file: > > > > #define CONFIG_JFFS2_NAND 1 > > #define CONFIG_CMD_JFFS2 > > #define CONFIG_SYS_MAX_FLASH_BANKS 1 > > #define CONFIG_CMD_NAND 1 > > > > I've now added the following #undef to the list of defines above: > > #undef CONFIG_CMD_FLASH > > Now after typing "help" at the U-Boot command line, I can finally see > the fsload command listed. However running fsload gives the following > error: > > U-Boot> fsload > support for FLASH devices not present > incorrect device: nor0 > > This appears to be due to some code in the /common/cmd_jffs2.c file. > Can fsload be only used for NOR memory, or is there a way to use it for > NAND flash as well? "support for FLASH devices not present" is printed when it's trying to act on a device labelled as NOR, but there's no NOR support present. Try the "chpart" command to switch to a NAND device, and/or make sure that your mtdparts variable is set correctly. -Scott _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
