From: Chris Morgan <macromor...@hotmail.com>
Add support for users to enter recovery mode by holding the function
button when they power up the device.
Since the device has soldered eMMC and sometimes does not expose a clk
pin on the mainboard there is a small chance that a user who flashes a
bad bootloader may not be able to recover if the headers themselves
are valid. As a result this check is done during spl_early_init() to
ensure that it runs as early as possible, and it does so by directly
manipulating the ADC hardware in lieu of loading the ADC driver.
Signed-off-by: Chris Morgan <macromor...@hotmail.com>
---
arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 11 +++++++++++
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 6 +++++-
configs/anbernic-rgxx3-rk3566_defconfig | 16 ++++++++++++----
include/configs/anbernic-rgxx3-rk3566.h | 2 ++
4 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
index f986e1941e..e3ab196d22 100644
--- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
@@ -76,6 +76,12 @@
/delete-property/ clock-names;
};
+&saradc {
+ bootph-all;
+ vref-supply = <&vcc_sys>;
+ status = "okay";
+};
+
&sdhci {
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
<&emmc_datastrobe>, <&emmc_rstnout>;
@@ -94,3 +100,8 @@
bootph-all;
status = "okay";
};
+
+&vcc_sys {
+ bootph-all;
+ status = "okay";
+};
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 3d0c614623..45854709f5 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -5,6 +5,7 @@
#include <abuf.h>
#include <adc.h>
+#include <asm/arch-rockchip/boot_mode.h>
#include <asm/io.h>
#include <display.h>
#include <dm.h>
@@ -119,11 +120,14 @@ static const struct rg353_panel rg353_panel_details[] = {
};
/*
- * Start LED very early so user knows device is on. Set color
+ * Check if rockchip_dnl button is pressed and reboot into rockusb if
+ * true. Start LED very early so user knows device is on. Set color
* to red.
*/
void spl_board_init(void)
{
+ setup_boot_mode();
+
/* Set GPIO0_C5, GPIO0_C6, and GPIO0_C7 to output. */
writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | \
(GPIO_C7 | GPIO_C6 | GPIO_C5),
diff --git a/configs/anbernic-rgxx3-rk3566_defconfig
b/configs/anbernic-rgxx3-rk3566_defconfig
index ed6643d9d4..4e72f75815 100644
--- a/configs/anbernic-rgxx3-rk3566_defconfig
+++ b/configs/anbernic-rgxx3-rk3566_defconfig
@@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
@@ -24,7 +25,9 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
@@ -32,7 +35,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_RNG_SEED=y
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
@@ -41,6 +44,8 @@ CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ADC=y
+CONFIG_SPL_POWER=y
CONFIG_SPL_ATF=y
CONFIG_CMD_PWM=y
CONFIG_CMD_GPT=y
@@ -50,8 +55,10 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks
assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
# CONFIG_NET is not set
+CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
@@ -67,13 +74,13 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
+CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
-CONFIG_DM_REGULATOR_SCMI=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
# CONFIG_RAM_ROCKCHIP_DEBUG is not set
@@ -89,5 +96,6 @@ CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_DW_MIPI=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_REGEX=y
+# CONFIG_RSA is not set
CONFIG_ERRNO_STR=y
# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/anbernic-rgxx3-rk3566.h
b/include/configs/anbernic-rgxx3-rk3566.h
index 3c4ea4e7d8..2aaac55c06 100644
--- a/include/configs/anbernic-rgxx3-rk3566.h
+++ b/include/configs/anbernic-rgxx3-rk3566.h
@@ -9,4 +9,6 @@
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
+#define RK_DNL_ADC_CHAN 0
+
#endif
--
2.34.1
