> -----Original Message----- > From: Lei Wen [mailto:lei...@marvell.com] > Sent: Monday, March 28, 2011 12:24 PM > To: Heiko Schocher; Prafulla Wadaskar; Wolfgang Denk; u- > b...@lists.denx.de; Marek Vasut; Ashish Karkare; Prabhanjan Sarnaik; Yu > Tang; adrian.w...@gmail.com > Subject: [PATCH V5 4/6] I2C: add i2c support for Pantheon platform > > Add i2c support to dkb board with pantheon soc. > > Signed-off-by: Lei Wen <lei...@marvell.com> > --- > Changelog: > V2: > NO CHANGE > > V3: > clean code sytle issue > Add i2c clock enable code include in I2C configure define block > > V4: > make i2c definition included in the ifdef > > V5: > NO CHANGE > > arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ > arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- > arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- > board/Marvell/dkb/dkb.c | 4 ++++ > include/configs/dkb.h | 13 +++++++++++++ > 5 files changed, 36 insertions(+), 3 deletions(-) > ...snip...
> diff --git a/include/configs/dkb.h b/include/configs/dkb.h > index 638af5e..599c8b8 100644 > --- a/include/configs/dkb.h > +++ b/include/configs/dkb.h > @@ -56,6 +56,19 @@ > #include "mv-common.h" > > #undef CONFIG_ARCH_MISC_INIT > + > +/* > + * I2C definition > + */ > +#define CONFIG_CMD_I2C This command definition should be moved up (below #include <config_cmd_default.h> Otherwise ack for rest of the code Regards.. Prafulla . . > +#ifdef CONFIG_CMD_I2C > +#define CONFIG_I2C_MV 1 > +#define CONFIG_PXA_I2C_REG 0xd4011000 > +#define CONFIG_HARD_I2C 1 > +#define CONFIG_SYS_I2C_SPEED 0 > +#define CONFIG_SYS_I2C_SLAVE 0xfe > +#endif > + > /* > * Environment variables configurations > */ > -- > 1.7.0.4 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
