Kernel dts import now provides bootph-all and bootph-pre-ram properties for the properties we have been overriding so far. Drop the same.
Reviewed-by: Dhruva Gole <d-g...@ti.com> Tested-by: Dhruva Gole <d-g...@ti.com> Signed-off-by: Nishanth Menon <n...@ti.com> --- Changes since v1: - tested and reviewed tags V1: https://lore.kernel.org/r/20231113145919.1928812-4...@ti.com arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi | 56 -------------------- 1 file changed, 56 deletions(-) diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi index 6f3a31558b20..7f8468f298f0 100644 --- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi +++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi @@ -13,36 +13,26 @@ tick-timer = &main_timer0; }; - memory@80000000 { - bootph-all; - }; - /* Keep the LEDs on by default to indicate life */ leds { - bootph-all; led-0 { default-state = "on"; - bootph-all; }; led-1 { default-state = "on"; - bootph-all; }; led-2 { default-state = "on"; - bootph-all; }; led-3 { default-state = "on"; - bootph-all; }; led-4 { default-state = "on"; - bootph-all; }; }; }; @@ -58,45 +48,7 @@ }; }; -&main_uart0 { - bootph-all; -}; - -&console_pins_default { - bootph-all; -}; - -&main_i2c0 { - bootph-all; -}; - -&local_i2c_pins_default { - bootph-all; -}; - -&gpio0_pins_default { - bootph-all; -}; - -&main_gpio0 { - bootph-all; -}; - -&main_gpio1 { - bootph-all; -}; - -&sdhci0 { - /* EMMC */ - bootph-all; -}; - -&emmc_pins_default { - bootph-all; -}; - &sd_pins_default { - bootph-all; /* Force to use SDCD card detect pin */ pinctrl-single,pins = < AM62X_IOPAD(0x023c, PIN_INPUT, 0) /* (A21) MMC1_CMD */ @@ -109,14 +61,6 @@ >; }; -&tps65219 { - bootph-all; -}; - -&sdhci1 { - bootph-all; -}; - #ifdef CONFIG_TARGET_AM625_A53_EVM #define SPL_AM625_BEAGLEPLAY_DTB "spl/dts/k3-am625-beagleplay.dtb" -- 2.40.0
