> -----Original Message----- > From: u-boot-boun...@lists.denx.de [mailto:u-boot-boun...@lists.denx.de] > On Behalf Of ro...@dawes.za.net > Sent: Friday, March 18, 2011 1:40 PM > To: u-boot@lists.denx.de > Subject: [U-Boot] Non-working Relocated DNS323 config > > This patch series contains the previous working configuration for > the DNS323, forward-ported to mainline, taking into account changes > made to the EDMiniV2 configuration on which this is based. > > Unfortunately, this does not boot at all. I get: > > Marvell>> bootm > ## Booting image at 00100000 ... > Image Name: UBoot dns323 > Image Type: ARM U-Boot Kernel Image (uncompressed) > Data Size: 170100 Bytes = 166.1 kB > Load Address: 03000000 > Entry Point: 03000000 > Verifying Checksum ... OK > OK > > Starting kernel ...
There might be machine id mismatch in the kernel and programmed in u-boot for this board. Regards.. Prafulla . . > > and that is the end of it. > > Any hints and suggestions as to what I may be doing wrong are gratefully > received. > > Regards, > > Rogan > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
