On November 8, 2023 thus sayeth Vignesh Raghavendra: > On 08/11/23 04:51, Bryan Brattlof wrote: > > All of the starter kit boards for the am62xxx extended family utilize > > the same 32k crystal oscillator for a more accurate clock for the RTC > > instance. Add the setup the clock mux and debounce configuration to the > > common board directory so the entire am62xxx extended family can utilize > > it. > > > > Signed-off-by: Bryan Brattlof <b...@ti.com> > > ---
... > > + /* Setup debounce conf registers - arbitrary values. > > + * Times are approx > > + */ > > + /* 1.9ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG1, 0x1); > > + /* 5ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG2, 0x5); > > + /* 20ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG3, 0x14); > > + /* 46ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG4, 0x18); > > + /* 100ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG5, 0x1c); > > + /* 156ms debounce @ 32k */ > > + writel(WKUP_CTRLMMR_DBOUNCE_CFG6, 0x1f); > > +} > > > Pad Debounce settings has nothing to do with RTC. This doesn't belong to > board_rtc_init() > Oops.. I have no idea what I was thinking yesterday. This was a really half-baked plan all the way through :) I'll get this properly sorted out for v2 Thanks for reviewing though ~Bryan
