Add uart baud rate table to arbel(npcm8xx) and poleg(npcm7xx)

Signed-off-by: Jim Liu <jjl...@nuvoton.com>

Changes for v2:
   - Add commit message
Changes for v3:
   - Modify CONFIG_SYS_BAUDRATE_TABLE
Changes for v4:
   - No change

---
 include/configs/arbel.h | 5 ++++-
 include/configs/poleg.h | 2 ++
 2 files changed, 6 insertions(+), 1 deletion(-)

diff --git a/include/configs/arbel.h b/include/configs/arbel.h
index 891257bc93..29010503d3 100644
--- a/include/configs/arbel.h
+++ b/include/configs/arbel.h
@@ -7,11 +7,14 @@
 #define __CONFIG_ARBEL_H
 
 #define CFG_SYS_SDRAM_BASE             0x0
-#define CFG_SYS_BOOTMAPSZ              (30 << 20)
+#define CFG_SYS_BOOTMAPSZ              (128 << 20)
 #define CFG_SYS_BOOTM_LEN              (20 << 20)
 #define CFG_SYS_INIT_RAM_ADDR  CFG_SYS_SDRAM_BASE
 #define CFG_SYS_INIT_RAM_SIZE  0x8000
 
+#define CFG_SYS_BAUDRATE_TABLE { 9600, 14400, 19200, 38400, 57600, 115200, 
230400, \                                             380400, 460800, 921600 }
+
+
 /* Default environemnt variables */
 #define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80400000\0"   \
                "stdin=serial\0"   \
diff --git a/include/configs/poleg.h b/include/configs/poleg.h
index 1e96e838be..2a2d85c8ec 100644
--- a/include/configs/poleg.h
+++ b/include/configs/poleg.h
@@ -13,6 +13,8 @@
 #define CFG_SYS_BOOTMAPSZ            (0x30 << 20)
 #define CFG_SYS_SDRAM_BASE           0x0
 
+#define CFG_SYS_BAUDRATE_TABLE { 57600, 115200, 230400, 460800 }
+
 /* Default environemnt variables */
 #define CFG_EXTRA_ENV_SETTINGS   "uimage_flash_addr=80200000\0"   \
                "stdin=serial\0"   \
-- 
2.25.1

Reply via email to