Now the driver supports also A1 phy layer.
Signed-off-by: Alexey Romanov <avroma...@salutedevices.com>
---
drivers/usb/dwc3/dwc3-meson-g12a.c | 73 ++++++++++++++++++++++++++----
1 file changed, 63 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c
b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 90418ddc1d..550e6682a2 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -28,6 +28,7 @@
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/compat.h>
+#include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
/* USB2 Ports Control Registers */
@@ -102,10 +103,22 @@ enum {
PHY_COUNT,
};
-static const char *phy_names[PHY_COUNT] = {
+static const char *const dwc3_meson_g12a_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
+static const char *const dwc3_meson_a1_phy_names[] = {
+ "usb2-phy0", "usb2-phy1"
+};
+
+struct dwc3_meson_g12a;
+
+struct dwc3_meson_g12a_drvdata {
+ const char *const *phy_names;
+ unsigned int phy_cnt;
+ int (*clk_init)(struct dwc3_meson_g12a *priv);
+};
+
struct dwc3_meson_g12a {
struct udevice *dev;
struct regmap *regmap;
@@ -119,6 +132,7 @@ struct dwc3_meson_g12a {
#if CONFIG_IS_ENABLED(DM_REGULATOR)
struct udevice *vbus_supply;
#endif
+ struct dwc3_meson_g12a_drvdata *drvdata;
};
#define U2P_REG_SIZE 0x20
@@ -293,10 +307,11 @@ int dwc3_meson_g12a_force_mode(struct udevice *dev, enum
usb_dr_mode mode)
static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
{
+ struct dwc3_meson_g12a_drvdata *data = priv->drvdata;
int i, ret;
- for (i = 0 ; i < PHY_COUNT ; ++i) {
- ret = generic_phy_get_by_name(priv->dev, phy_names[i],
+ for (i = 0 ; i < data->phy_cnt; ++i) {
+ ret = generic_phy_get_by_name(priv->dev, data->phy_names[i],
&priv->phys[i]);
if (ret == -ENOENT || ret == -ENODATA)
continue;
@@ -354,18 +369,36 @@ static int dwc3_meson_g12a_clk_init(struct
dwc3_meson_g12a *priv)
return 0;
}
+static int dwc3_meson_a1_clk_init(struct dwc3_meson_g12a *priv)
+{
+ int ret;
+
+ ret = clk_get_by_name(priv->dev, "usb_bus", &priv->clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&priv->clk);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
static int dwc3_meson_g12a_probe(struct udevice *dev)
{
struct dwc3_meson_g12a *priv = dev_get_plat(dev);
+ struct dwc3_meson_g12a_drvdata *data =
+ (struct dwc3_meson_g12a_drvdata *)dev_get_driver_data(dev);
int ret, i;
+ priv->drvdata = data;
priv->dev = dev;
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
if (ret)
return ret;
- ret = dwc3_meson_g12a_clk_init(priv);
+ ret = data->clk_init(priv);
if (ret)
return ret;
@@ -398,7 +431,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
if (ret)
return ret;
- for (i = 0 ; i < PHY_COUNT ; ++i) {
+ for (i = 0 ; i < data->phy_cnt; ++i) {
if (!priv->phys[i].dev)
continue;
@@ -407,7 +440,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
goto err_phy_init;
}
- for (i = 0; i < PHY_COUNT; ++i) {
+ for (i = 0; i < data->phy_cnt; ++i) {
if (!priv->phys[i].dev)
continue;
@@ -419,7 +452,7 @@ static int dwc3_meson_g12a_probe(struct udevice *dev)
return 0;
err_phy_init:
- for (i = 0 ; i < PHY_COUNT ; ++i) {
+ for (i = 0 ; i < data->phy_cnt ; ++i) {
if (!priv->phys[i].dev)
continue;
@@ -432,20 +465,21 @@ err_phy_init:
static int dwc3_meson_g12a_remove(struct udevice *dev)
{
struct dwc3_meson_g12a *priv = dev_get_plat(dev);
+ struct dwc3_meson_g12a_drvdata *data = priv->drvdata;
int i;
reset_release_all(&priv->reset, 1);
clk_release_all(&priv->clk, 1);
- for (i = 0; i < PHY_COUNT; ++i) {
+ for (i = 0; i < data->phy_cnt; ++i) {
if (!priv->phys[i].dev)
continue;
generic_phy_power_off(&priv->phys[i]);
}
- for (i = 0 ; i < PHY_COUNT ; ++i) {
+ for (i = 0 ; i < data->phy_cnt; ++i) {
if (!priv->phys[i].dev)
continue;
@@ -455,8 +489,27 @@ static int dwc3_meson_g12a_remove(struct udevice *dev)
return dm_scan_fdt_dev(dev);
}
+static const struct dwc3_meson_g12a_drvdata meson_g12a_drvdata = {
+ .phy_names = dwc3_meson_g12a_phy_names,
+ .phy_cnt = ARRAY_SIZE(dwc3_meson_g12a_phy_names),
+ .clk_init = dwc3_meson_g12a_clk_init,
+};
+
+static const struct dwc3_meson_g12a_drvdata meson_a1_drvdata = {
+ .phy_names = dwc3_meson_a1_phy_names,
+ .phy_cnt = ARRAY_SIZE(dwc3_meson_a1_phy_names),
+ .clk_init = dwc3_meson_a1_clk_init,
+};
+
static const struct udevice_id dwc3_meson_g12a_ids[] = {
- { .compatible = "amlogic,meson-g12a-usb-ctrl" },
+ {
+ .compatible = "amlogic,meson-g12a-usb-ctrl",
+ .data = (ulong)&meson_g12a_drvdata,
+ },
+ {
+ .compatible = "amlogic,meson-a1-usb-ctrl",
+ .data = (ulong)&meson_a1_drvdata,
+ },
{ }
};
